Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,191,288Inspections Most recent open 2026-07-24 Last loaded 2026-07-29

OSHA Inspection: RIGOBERTO FLORES RENTERIA

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of RIGOBERTO FLORES RENTERIA in 5918 PENCESTER ST., SPRING, TX 77389 (NAICS 238140). OSHA activity number 344633771.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Rigoberto Flores Renteria — free Get an email when a new federal OSHA severe-injury report for Rigoberto Flores Renteria is published. One employer, no account, unsubscribe in one click.
Site address
5918 PENCESTER ST.
City
SPRING
State
TX
ZIP
77389
Mailing
510 SOREN LN, HOUSTON, TX 77076
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238140
Employees
3
Ownership type
A

4 citations on file for this inspection.

1926.102 A01

Serious Gravity 5 1 instance 3 exposed
Issued
Apr 9, 2020
Penalty
Initial $2,892 · Current $1,735 Reduced
29 CFR 1926.102(a)(1): Employees were not provided with eye and face protection equipment when machines or operations presented potential eye or face injury from physical, chemical, or radiation agents:    On or about February 14, 2020 at the construction site where an employee was exposed to struck by hazards when operating a Dewalt radial saw without wearing eye protection.
Recent events (2)
  • — I (S) $1735.2
  • — Z (S) $2892

1926.451 B01

Serious Gravity 5 1 instance 3 exposed
Issued
Apr 9, 2020
Penalty
Initial $2,313 · Current $1,388 Reduced
29 CFR 1926.451(b)(1): Each platform on all working levels of scaffolds was not fully planked or decked between the front uprights and the guardrail supports.    On or about February 14, 2020 an employee was exposed to a fall hazard while working from a tubular welded frame scaffold without the working level being fully planked.
Recent events (2)
  • — I (S) $1387.8
  • — Z (S) $2313

1926.501 B13

Serious Gravity 5 1 instance 3 exposed
Issued
Apr 9, 2020
Penalty
Initial $2,892 · Current $1,735 Reduced
29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m)  or more above lower levels was not protected by guardrail systems, safety net systems, personal fall arrest systems, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501(b):  On or about February 14, 2020 an employee was exposed to a fall hazard of more than 6 feet while applying brick to a home without a fall protection system.
Recent events (2)
  • — I (S) $1735.2
  • — Z (S) $2892

1926.405 G02 IV

Other-than-serious 1 instance 3 exposed
Issued
Apr 9, 2020
Penalty
Initial $0 · Current $0
29 CFR 1926.405(g)(2)(iv): Flexible cords were not connected to devices and fittings so that strain relief is provided to prevent pull from being directly transmitted to joints or terminal screws:    On or about February 14, 2020 employees were using an extension cord where the female end of the cord was not provided with strain relief because of the insulation that had been pulled back.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344633771.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.