OSHA Inspection: PROFESSIONAL FRAMING, LLC

Issued

May 11, 2020

Abate by

May 26, 2020

Penalty

Initial $4,048 · Current $2,000 Reduced

General-duty citation text

29 CFR 1926.20(b)(2): Accident prevention responsibilities. Such programs shall provide for frequent and regular inspections of the job sites, materials, and equipment to be made by competent persons designated by the employers.     a) On or about 02/20/2020 there was no frequent and regular inspection program being maintained in use by a competent person to ensure the job site, material and equipment; such as fall protection systems was being utilized.

Issued

May 11, 2020

Abate by

May 26, 2020

Penalty

Initial $4,048 · Current $0 Reduced

General-duty citation text

29 CFR 1926.501(b)(4)(i): Holes. Each employee on walking/working surfaces shall be protected from falling through holes (including skylights) more than 6 feet (1.8 m) above lower levels, by personal fall arrest systems, covers, or guardrail systems erected around such holes.      a) On or about 02/20/2020 an employee was framing a roof at a new residential structure, next to an opened hole on the roof. Employee was not utilizing any fall protection system. The height of the fall hazard was measured at 20 ft. from the ground.

Issued

May 11, 2020

Abate by

May 26, 2020

Penalty

Initial $4,048 · Current $0 Reduced

General-duty citation text

29 CFR 1926.501(b)(13): "Residential construction." Each employee engaged in residential construction activities 6 feet (1.8 m) or more above lower levels shall be protected by guardrail systems, safety net system, or personal fall arrest system unless another provision in paragraph (b) of this section provides for an alternative fall protection measure. Exception: When the employer can demonstrate that it is infeasible or creates a greater hazard to use these systems, the employer shall develop and implement a fall protection plan which meets the requirements of paragraph (k) of 1926.502.  Note: There is a presumption that it is feasible and will not create a greater hazard to implement at least one of the above-listed fall protection systems. Accordingly, the employer has the burden of establishing that it is appropriate to implement a fall protection plan which complies with 1926.502(k) for a particular workplace situation, in lieu of implementing any of those systems.       a)     On or about 02/20/2020 an employee was framing a roof at a new residential structure. Employee was not utilizing any fall protection system. The height of the fall hazard was measured at 20 ft. from the ground.

Issued

May 11, 2020

Abate by

May 26, 2020

Penalty

Initial $4,048 · Current $0 Reduced

General-duty citation text

29 CFR 1926.503(a)(1): Training Program. The employer shall provide a training program for each employee who might be exposed to fall hazards. The program shall enable each employee to recognize the hazards of falling and shall train each employee in the procedures to be followed in order to minimize these hazards.      a)       On or about 02/20/2020 employees have not been trained on fall protection systems and on hazards of falls, while working at heights of 20 ft. from the ground.