HOUSTON, TX ·
OSHA Inspection: G & H DIVERSIFIED MFG., L.P.
Complaint inspection · Health discipline
At a glance
On , OSHA opened a complaint health inspection of G & H DIVERSIFIED MFG., L.P. in 11660 BRITTMORE PARK DRIVE, HOUSTON, TX 77001 (NAICS 332721). OSHA activity number 344646146.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- G & H DIVERSIFIED MFG., L.P.
- Site address
- 11660 BRITTMORE PARK DRIVE
- City
- HOUSTON
- State
- TX
- ZIP
- 77001
- Mailing
- 11660 BRITTMORE PARK DRIVE, HOUSTON, TX 77001
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332721
- Employees
- 470
- Ownership type
- Private (A)
Citations
6 citations on file for this inspection.
5(a)(1)
- Issued
- May 11, 2020
- Abate by
- May 21, 2020
- Penalty
- Initial $9,639 · Current $2,600 Reduced
General-duty citation text
OSH ACT of 1970 Section (5)(a)(1): The employer did not furnish to each employee employment and a place of employment which was free from recognized hazards, which were causing or likely to cause death or serious physical harm to employees, in that employees were exposed to struck-by hazards while operating a crane: a. On or about February 21, 2020 in the architectural shop, employees were exposed to struck-by hazards when the hoist control station operating the Gaffey 10-ton crane, did not have function labels. b. On or about February 21, 2020 in the architectural shop, employees were exposed to struck-by hazards when hoisting material using the Gaffey 10-ton crane without a functioning safety latch on the hook of the southwest hoist. c. On or about February 5, 2020 in the machine shop, employees were exposed to struck-by hazards when hoisting material using the western ProservAnchor 10-ton crane without a functioning safety latch on the hook of the southeast hoist.
Recent events (3)
- · F (S) $2600
- · C (S) $9639
- · Z (S) $9639
1910.212 A03 II
- Issued
- May 11, 2020
- Penalty
- Initial $9,639 · Current $2,600 Reduced
General-duty citation text
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s). On or about January 29, 2020, employees in the architectural shop were exposed to struck-by hazards while using an Amada FBD-1030E press brake without a guard to protect employees from the point of operation.
Recent events (3)
- · F (S) $2600
- · C (S) $9639
- · Z (S) $9639
1910.215 A02
- Issued
- May 11, 2020
- Abate by
- May 15, 2020
- Penalty
- Initial $9,639 · Current $2,600 Reduced
General-duty citation text
29 CFR 1910.215(a)(2): Abrasive wheel(s) used on grinding machinery were not provided with safety guard(s) which covered the spindle end, nut, flange projections. On February 12, 2020, employees in the machine shop were exposed to struck-by hazards when operating a bench grinder without a guard over the spindle and nut.
Recent events (3)
- · F (S) $2600
- · C (S) $9639
- · Z (S) $9639
1910.215 A04
- Issued
- May 11, 2020
- Abate by
- May 15, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(a)(4): Grinding machinery was not used with work rest(s) to support offhand grinding work: On February 12, 2020, employees in the machine shop were exposed to caught-by hazards when operating a bench grinder without a work rest.
Recent events (3)
- · F (S) $0
- · C (S) $0
- · Z (S) $0
1910.305 G01 IV A
- Issued
- May 11, 2020
- Abate by
- May 15, 2020
- Penalty
- Initial $7,711 · Current $2,200 Reduced
General-duty citation text
29 CFR 1910.305(g)(1)(iv)(A): Flexible cords and/or cables were used as a substitute for the fixed wiring of a structure: On or about February 21, 2020 in the machine shop, employees were exposed to an electrical hazard from flexible cords which was used as a substitute for fixed wiring.
Recent events (3)
- · F (S) $2200
- · C (S) $7711
- · Z (S) $7711
1910.134 C02 I
- Issued
- May 11, 2020
- Abate by
- May 21, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(c)(2)(i): Respirator users were not provided with the information contained in Appendix D to 29 CFR 1910.134 when the employer determined that any voluntary respirator use was permissible: On or about February 21, 2020, employees in the machine shop were voluntarily allowed to use filtering-face piece respirators without being provided the information in Appendix D.
Recent events (3)
- · F (O) $0
- · C (O) $0
- · Z (O) $0
More inspections in this industry (NAICS 332721)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 344646146.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.