Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: J&G CONSTRUCTION SERVICES INC.

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of J&G CONSTRUCTION SERVICES INC. in 535 GRAND STREET, BROOKLYN, NY 11211 (NAICS 238990). OSHA activity number 344662283.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch J&G Construction Services INC. — free Get an email when a new federal OSHA severe-injury report for J&G Construction Services INC. is published. One employer, no account, unsubscribe in one click.
Site address
535 GRAND STREET
City
BROOKLYN
State
NY
ZIP
11211
Mailing
125-05 101 AVE, SOUTH RICHMOND HILL, NY 11419
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238990
Employees
6
Ownership type
A

4 citations on file for this inspection.

1926.451 A06

Serious Gravity 10 1 instance 3 exposed
Issued
Aug 26, 2020
Abate by
Sep 8, 2020
Penalty
Initial $9,447 · Current $9,447
29 CFR 1926.451(a)(6): Scaffolds were not constructed in accordance with the design by a qualified person:  535 Grand Street in Brooklyn, NY.  On or about 02/27/2020.  a) Employees were dismantling the scaffolding was not erected, installed and maintained per the Engineer's design.  The scaffold was constructed and maintained by the employer and had not installed and maintained the tiebacks, did not install and the outrigger beams and the specific plans for the beam stability per the design.
Recent events (1)
  • — Z (S) $9447

1926.451 C01 II

Serious Gravity 10 1 instance 3 exposed
Issued
Aug 26, 2020
Abate by
Sep 8, 2020
Penalty
Initial $9,447 · Current $9,447
29 CFR 1926.451(c)(1)(ii): Supported scaffolds with a height to base width (including outrigger supports, if used) ratio of more than four to one (4:1) were not restrained from tipping by installing guys, ties, and braces according to the manufacturer.  Site: 535 Grand Street in Brooklyn, NY.  On or about 02/27/2020.  a) Employees were dismantling the scaffolding that had tiebacks removed from the top and lower sections.  The top section tiebacks were previously removed and the stucco patches were repaired and painted, the lower sections were also removed and the tieback were partially patched.
Recent events (1)
  • — Z (S) $9447

1926.451 F07

Serious Gravity 10 1 instance 3 exposed
Issued
Aug 26, 2020
Abate by
Sep 8, 2020
Penalty
Initial $9,447 · Current $9,447
29 CFR 1926.451(f)(7): Scaffolds were not erected, moved, dismantled, or altered, by trained and experienced employees under the supervision and direction of a competent person qualified in scaffold erection, moving, dismantling or alteration.   On or about Feb. 27, 2020  At 535 Grand St. Brooklyn NY   A competent person did not supervise the dismantling of a tubular welded frame scaffold erected on the side of the construction site. The scaffold was not installed and maintained with appropriate tiebacks and supports per the plans designed by the Engineer.  Employees were exposed to crushing injuries when the scaffold collapsed during the dismantling of the scaffold.
Recent events (1)
  • — Z (S) $9447

1926.452 I01

Serious Gravity 10 6 instances 3 exposed
Issued
Aug 26, 2020
Abate by
Sep 8, 2020
Penalty
Initial $9,447 · Current $9,447
29 CFR 1926.452(i)(1): The inboard end of the outrigger beams, measured from the fulcrum point to the extreme point of anchorage, was not less than one and one half times the outboard end in length.  On or about Feb. 27, 2020  At 535 Grand St. Brooklyn NY   The outrigger beams installed to erect the tubular welded frame scaffold had the inboard length less  one and one half the outboard length.
Recent events (1)
  • — Z (S) $9447

View J&G Construction Services INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344662283.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.