BIRMINGHAM, AL ·
OSHA Inspection: ABBA CONTRACT, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of ABBA CONTRACT, INC. in 2500 CONE DRIVE, BIRMINGHAM, AL 35217 (NAICS 314120). OSHA activity number 344673496.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ABBA CONTRACT, INC.
- Site address
- 2500 CONE DRIVE
- City
- BIRMINGHAM
- State
- AL
- ZIP
- 35217
- Mailing
- 2500 CONE DRIVE, BIRMINGHAM, AL 35217
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 314120
- Employees
- 24
- Ownership type
- Private (A)
Citations
6 citations on file for this inspection.
1910.178 L01 I
- Issued
- May 29, 2020
- Abate by
- Jun 24, 2020
- Penalty
- Initial $3,084 · Current $1,850 Reduced
General-duty citation text
29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l): (a) On or about 03/04/2020 - 2500 Cone Drive, Birmingham, AL, employees were exposed to a struck-by hazard when employees who operate forklift trucks had not completed the required formal instruction, practical training, and evaluation of the operator's performance in the workplace.
Recent events (2)
- · I (S) $1850.4
- · Z (S) $3084
1910.219 A03
- Issued
- May 29, 2020
- Abate by
- Jun 24, 2020
- Penalty
- Initial $3,856 · Current $2,314 Reduced
General-duty citation text
29 CFR 1910.219(a)(3): The sides and face sections nip points of the drive belt(s) and pulley(s) of textile machinery were not guarded by a guard which extended at least six inches beyond the rim of the pulley on the in-running and off-running sides of the belt and at least two (2) inches away from the rim and face of the pulley in all other directions: (a) On or about 03/04/2020 - Drapery Area at Tacker Machine, employees were exposed to caught-in hazards when the guards were missing for the drive belt and pulleys.
Recent events (2)
- · I (S) $2313.6
- · Z (S) $3856
1910.157 C01
- Issued
- May 29, 2020
- Abate by
- Jun 24, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.157(c)(1): Portable fire extinguishers were not mounted, located and identified so that they were readily accessible without subjecting the employees to injuries: (a) On or about 03/04/2020 - Upholstery Area at Shipping and Receiving Desk, employees were exposed to fire hazards when a fire extinguisher was blocked by a desk and work table.
Recent events (2)
- · I (O) $0
- · Z (O) $0
1910.157 E02
- Issued
- May 29, 2020
- Abate by
- Jun 24, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.157(e)(2): Portable fire extinguishers were not visually inspected at least monthly: (a) On or about 03/04/2020 - 2500 Cone Drive, Birmingham, AL, employees were exposed to fire hazards when fire extinguishers had not been visually inspected monthly.
Recent events (2)
- · I (O) $0
- · Z (O) $0
1910.305 G01 IV A
- Issued
- May 29, 2020
- Abate by
- Jun 24, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(g)(1)(iv)(A): Flexible cords and/or cables were used as a substitute for the fixed wiring of a structure: (a) On or about 03/04/2020 - Drapery Area at Textile Machines, employees were exposed to a fire hazard when flexible cords were attached to splitters and relocatable power taps to power textile machines such as, but not limited to, a tacker, serger, pleater, and sewing machines.
Recent events (2)
- · I (O) $0
- · Z (O) $0
1910.1200 E01
- Issued
- May 29, 2020
- Abate by
- Jul 6, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met: (a) On or about 03/04/2020 - 2500 Cone Drive, Birmingham, AL, employees were exposed to fire and chemical hazards when a written hazard communication program had not been developed and implemented for employees working in and around chemicals including, but not limited to propane, Pro-Stick 65 Hi-Strength Spray Adhesive, and glue sticks.
Recent events (2)
- · I (O) $0
- · Z (O) $0
More inspections in this industry (NAICS 314120)
More inspections in AL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 344673496.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.