OSHA Inspection: S & V EXXON, LLC

Issued

Aug 24, 2020

Abate by

Sep 1, 2020

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.37(a)(3): Exit route(s) were not kept free and unobstructed:  (a) Repair shop - On or about 3/16/2020, an exit door was obstructed by tools and materials placed in front of the exit door, exposing employees to fire hazards.

Issued

Aug 24, 2020

Abate by

Sep 1, 2020

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.37(b)(2): Each exit was not clearly visible and marked by a sign reading "Exit":  (a) Repair shop - On or about 3/16/2020, exit doors were not marked, exposing employees to fire hazards.

Issued

Aug 24, 2020

Abate by

Sep 1, 2020

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.141(d)(2)(ii): Lavatories were not provided with hot and cold, or tepid running water:  (a) Restroom - On or about 3/16/2020, the lavatory was not provided with hot or tepid running water, exposing employees to chemical and biological hazards.

Issued

Aug 24, 2020

Abate by

Sep 1, 2020

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.212(a)(5): Fan blade guard(s) were not provided where the periphery of the blades was less than seven feet from the floor or working level:  (a) Oil change bay - On or about 3/16/2020, a fan on an air compressor was not guarded, exposing employees to caught-in and amputation hazards.

Issued

Aug 24, 2020

Abate by

Sep 1, 2020

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o):  (a) Oil change bay - On or about 3/16/2020, the motor and compressor pulleys on an air compressor were not guarded, exposing employees to caught-in and amputation hazards.

Issued

Aug 24, 2020

Abate by

Sep 1, 2020

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.219(e)(3)(i): Vertical or inclined belt(s) were not enclosed by guard(s) conforming to the requirements specified at 29 CFR 1910.219(m) and (o):  (a) Oil change bay - On or about 3/16/2020, the v-belts driving the compressor pulleys on an air compressor were not guarded, exposing employees to caught-in and amputation hazards.

Issued

Aug 24, 2020

Abate by

Sep 1, 2020

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch:  (a) Tire/Inspection shop - On or about 3/16/2020, the employer allowed employees to operate a bench grinder with a work rest which was 1/2 of an inch from the grinding surface, exposing employees to caught-in, struck-by, and amputation hazards.

Issued

Aug 24, 2020

Abate by

Sep 1, 2020

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch:  (a) Tire/Inspection shop - On or about 3/16/2020, the employer allowed employees to operate a bench grinder with a tongue guard which was 3/4 of an inch from the grinding surface, exposing employees to caught-in, struck-by, and amputation hazards.

Issued

Aug 24, 2020

Abate by

Sep 1, 2020

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.303(b)(7)(i): Unused openings in boxes, raceways, auxiliary gutters, cabinets, equipment cases, or housings were not effectively closed to afford protection substantially equivalent to the wall of the equipment  (a) Tire/Inspection shop - On or about 3/16/2020, a 240 volt breaker panel had unused opening which were not closed, exposing employees to electrical shock and fire hazards.  (b) Repair shop - On or about 3/16/2020, a 110 volt duplex outlet box had unused openings which were not closed, exposing employees to electrical shock and fire hazards.  (c) Tire/Inspection shop - On or about 3/16/202, a 240 volt breaker subpanel had unused openings which were not closed, exposing employees to electrical shock and fire hazards.

Issued

Aug 24, 2020

Abate by

Sep 1, 2020

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.304(a)(2): Grounded conductors were attached to terminals or leads so as to reverse designated polarity:  (a) Repair shop - On or about 3/16/2020, a 110 volt duplex outlet box connected in a manner which reversed it's designated polarity, exposing employees to electrical shock hazards.