FARMINGTON, NH ·
OSHA Inspection: SCHAEFER ROLLS INC.
Fatality or catastrophe inspection · Safety discipline
At a glance
On , OSHA opened a fatality or catastrophe safety inspection of SCHAEFER ROLLS INC. in 23 PLANK INDUSTRIAL DR., FARMINGTON, NH 03835 (NAICS 339999). OSHA activity number 344709985.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SCHAEFER ROLLS INC.
- Site address
- 23 PLANK INDUSTRIAL DR.
- City
- FARMINGTON
- State
- NH
- ZIP
- 03835
- Mailing
- 23 PLANK INDUSTRIAL DR., FARMINGTON, NH 03835
What kind of inspection was it?
- Inspection type
- Fatality or catastrophe (M)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 339999
- Employees
- 30
- Ownership type
- Private (A)
Citations
4 citations on file for this inspection.
1910.178 L01 I
- Issued
- Jun 15, 2020
- Abate by
- Jul 31, 2020
- Penalty
- Initial $6,747 · Current $6,747
General-duty citation text
29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l): Location: site On or about 3/24/2020, the employer did not ensure employees operating fork lifts were trained to safely operated the fork lifts.
Recent events (2)
- · I (S) $6747
- · Z (S) $6747
1910.178 L04 III
- Issued
- Jun 15, 2020
- Abate by
- Jul 31, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(l)(4)(iii): An evaluation of each powered industrial truck operator's performance was not being conducted at least once every three years: Location: site On or about 3/24/2020 the employer did not ensure employees operating fork lifts were evaluated at least every three years.
Recent events (2)
- · I (S) $0
- · Z (S) $0
1910.219 C02 I
- Issued
- Jun 15, 2020
- Penalty
- Initial $9,446 · Current $9,446
General-duty citation text
29 CFR 1910.219(c)(2)(i): All exposed part(s) of horizontal shafting seven (7) feet or less from floor or working platform were not protected by stationary casing(s) enclosing shafting completely or by trough(s) enclosing sides and top or sides and bottom of shafting: Location: shop On or about 3/24/2020, the employer did not ensure the power transmission shaft was guarded on the Shaffer two wheel roll grinder which exposed employees to a caught-by hazard.
Recent events (2)
- · I (S) $9446
- · Z (S) $9446
1910.219 H01
- Issued
- Jun 15, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(h)(1): Projecting key(s), setscrew(s), or other projections in revolving part(s) were not removed, made flush, or guarded by metal cover(s). Location: shop On or about 3/24/2020, employees were exposed to a caught-by hazard when the employer did not ensure the set screws on the Driver, which connects the power transmission shaft to the roll core, were flush or guarded on a Shaffer two wheel roll grinder.
Recent events (2)
- · I (S) $0
- · Z (S) $0
More inspections in this industry (NAICS 339999)
More inspections in NH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 344709985.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.