Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,191,288Inspections Most recent open 2026-07-24 Last loaded 2026-07-29

OSHA Inspection: J & J LUMBER COMPANY, INC.

Federal Agency inspection · Safety discipline

On , OSHA opened a federal Agency safety inspection of J & J LUMBER COMPANY, INC. in 29 SAWMILL LANE, AMITY, AR 71921 (NAICS 321113). OSHA activity number 344725163.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch J & J Lumber Company, INC. — free Get an email when a new federal OSHA severe-injury report for J & J Lumber Company, INC. is published. One employer, no account, unsubscribe in one click.
Site address
29 SAWMILL LANE
City
AMITY
State
AR
ZIP
71921
Mailing
29 SAWMILL LANE, AMITY, AR 71921
Inspection type
Federal Agency (M)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
321113
Employees
46
Ownership type
A

6 citations on file for this inspection.

1910.22 A01

Serious Gravity 5 4 instances 3 exposed
Issued
Oct 6, 2020
Abate by
Oct 28, 2020
Penalty
Initial $8,097 · Current $6,500 Reduced
29 CFR 1910.22(a)(1): All places of employment, passageways, storerooms, service rooms, and walking-working surfaces were not kept in a clean, orderly, and sanitary condition.  (a)  employees operating the off-bear-belt and edger machine were exposed to trip and fall hazard from flexible cords for foot pedals and the control board.  (b) employees operating the off-bear-belt and edger machine were exposed to trip and fall hazard from an accumulation of wood chips, wood dust, and other debris.  (c)  employees operating the off-bear-belt and edger machine were exposed to fire and burn hazards from dust accumulation on walls and other surfaces.  (d)  employees operating the off-bear-belt and edger machine were exposed to hazards associated with the accumulation of shop rags and other combustible material stored in and around the conveyor belt.
Recent events (2)
  • — I (S) $6500
  • — Z (S) $8097

1910.265 C18 I

Serious Gravity 5 3 instances 2 exposed
Issued
Oct 6, 2020
Abate by
Oct 28, 2020
Penalty
Initial $6,747 · Current $5,025 Reduced
29 CFR 1910.265(c)(18)(i): Pulley(s), sprocket(s), sheave(s), drum(s) and block(s) of conveyor(s) were not arranged to prevent the possibility of injury due to hands or parts of clothing being caught between the belt(s) and pulley(s) or chain(s) and sprockets:    a) On or about April 20, 2020, at the off-bear-edger workstation, employees were exposed to unguarded conveyor belt and pulleys on the off-bear-belt conveyor that transported lumber from the head-rig-saw to other saws, including the edger machine.  b) On or about April 20, 2020, at the off-bear-edger workstation, employees were exposed to unguarded chain and sprockets of the chain conveyor that transported lumber from the edger machine.  c) On or about April 20, 2020, at the off-bear-edger workstation, employees were exposed to unguarded shaft ends projecting from the off-bear-belt conveyor that transported lumber from the head-rig-saw to other saws, including the edger machine.
Recent events (2)
  • — I (S) $5025
  • — Z (S) $6747

1910.265 E05 III A

Deleted Serious Gravity 5 1 instance 1 exposed
Issued
Oct 6, 2020
Abate by
Oct 28, 2020
Penalty
Initial $6,747 · Current $0 Reduced
29 CFR 1910.265(e)(5)(iii)(a): Edger(s) were not provided with safety fingers or other approved methods of preventing kickbacks or guarding against them:  Employees operating the Bull Edger Windham 6" were exposed to struck by hazards in that the non kickback fingers did not prevent kickback for all thicknesses of material being cut.
Recent events (2)
  • — I (S) $0
  • — Z (S) $6747

1910.305 B01 I

Serious Gravity 5 1 instance 3 exposed
Issued
Oct 6, 2020
Abate by
Oct 28, 2020
Penalty
Initial $8,096 · Current $5,425 Reduced
29 CFR 1910.305(b)(1)(i): Conductors entering cutout boxes, cabinets, or fittings were not protected from abrasions:  On or about April 20, 2020, employees operating the off-bear-belt and edger machine were exposed to fire and electric shock hazards from flexible cord coming from the bottom of the side mounted electrical panel in that the bushing has separated from the panel.
Recent events (2)
  • — I (S) $5425
  • — Z (S) $8096

1910.305 G01 IV A

Serious Gravity 5 3 instances 3 exposed
Issued
Oct 6, 2020
Abate by
Oct 28, 2020
Penalty
Initial $0 · Current $0
29 CFR 1910.305(g)(1)(iv)(A): Flexible cords and/or cables were used as a substitute for the fixed wiring of a structure:  On or about April 20, 2020, employees operating the off-bear-belt and edger machine were exposed to fire and electric shock hazards from flexible cords used to provide power to equipment such as, but not limited to:  (a)  Off-bear station foot pedals  (b)  Edger control board receiving power from yellow cord connect to switch mounted to disconnect   (c)  Electrical panels and disconnects located on the wall behind the off-bear conveyor  (d)
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1904.39 A02

Other-than-serious 1 instance 1 exposed
Issued
Oct 6, 2020
Abate by
Oct 21, 2020
Penalty
Initial $6,748 · Current $5,050 Reduced
29 CFR 1904.39(a)(2): The employer did not report within 24-hours a work-related incident resulting in in-patient hospitalization, amputation or the loss of an eye.  The employer failed to report an inpatient hospitalization that occurred on April 8, 2020 at about 8:00am within 24 hours.  OSHA was notified on April 15, 2020.
Recent events (2)
  • — I (O) $5050
  • — Z (O) $6748

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344725163.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.