Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: KRZYSZTOF DROZD DBA KRZYSZTOF DROZD

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of KRZYSZTOF DROZD DBA KRZYSZTOF DROZD in 77 S VIEW ST., AURORA, IL 60506 (NAICS 238170). OSHA activity number 344726559.

Watch Krzysztof Drozd DBA Krzysztof Drozd — free Get an email when a new federal OSHA severe-injury report for Krzysztof Drozd DBA Krzysztof Drozd is published. One employer, no account, unsubscribe in one click.
Site address
77 S VIEW ST.
City
AURORA
State
IL
ZIP
60506
Mailing
25075 N. ELLRIE TERRACE, LAKE ZURICH, IL 60047
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238170
Employees
3
Ownership type
A

5 citations on file for this inspection.

1926.451 E01

Serious Gravity 10 2 instances 3 exposed
Issued
Apr 17, 2020
Abate by
May 11, 2020
Penalty
Initial $0 · Current $0
29 CFR 1926.451(e)(1): When scaffold platforms are more than 2 feet (0.6 m) above or below a point of access, portable ladders, hook-on ladders, attachable ladders, stair towers (scaffold stairways/towers), stairway-type ladders (such as ladder stands), ramps, walkways, integral prefabricated scaffold access, or direct access from another scaffold, structure, personnel hoist, or similar surface shall be used. Crossbraces shall not be used as a means of access.  On or about February 20, 2020, employees using ladder jack scaffolding were not provided with a safe means of access and egress to the work platform.  An separate access ladder was not provided, requiring employees to climb around the work platform for access and egress.   Abatement documentation is required for this item in accordance with 29 CFR 1903.19(d).
Recent events (1)
  • — Z (S) $0

1926.451 G01 I

Serious Gravity 10 1 instance 1 exposed
Issued
Apr 17, 2020
Abate by
May 11, 2020
Penalty
Initial $0 · Current $0
29 CFR 1926.451(g)(1)(i): Each employee on a boatswains' chair, catenary scaffold, float scaffold, needle beam scaffold, or ladder jack scaffold shall be protected by a personal fall arrest system.  On or about February 20, 2020, the employer failed to ensure that employees were protected from fall hazards while working on a ladder jack scaffold approximately 30 feet above grade.  Fall protection was not being utilized.   Abatement documentation is required for this item in accordance with 29 CFR 1903.19(d).
Recent events (1)
  • — Z (S) $0

1926.452 K01

Serious Gravity 5 1 instance 1 exposed
Issued
Apr 17, 2020
Abate by
May 11, 2020
Penalty
Initial $0 · Current $0
29 CFR 1926.452(k)(1): Platforms shall not exceed a height of 20 feet (6.1 m).  On or about February 20, 2020, an employee was exposed to fall hazards while working on ladder jack scaffold approximately 30 feet above grade.  The work platform of the scaffold exceeded a height of 20 feet.    Abatement certification is required for this item in accordance with 29 CFR 1903.19(c).
Recent events (1)
  • — Z (S) $0

1926.452 K05

Serious Gravity 5 1 instance 1 exposed
Issued
Apr 17, 2020
Abate by
May 11, 2020
Penalty
Initial $0 · Current $0
29 CFR 1926.452(k)(5): Scaffold platforms shall not be bridged one to another.  On or about February 20, 2020, an employee was exposed to fall hazards while working on ladder jack scaffold approximately 30 feet above grade.  The work platforms were bridged to one another over a single support ladder.     Abatement certification is required for this item in accordance with 29 CFR 1903.19(c).
Recent events (1)
  • — Z (S) $0

1926.454 A

Serious Gravity 5 1 instance 3 exposed
Issued
Apr 17, 2020
Abate by
May 11, 2020
Penalty
Initial $0 · Current $0
29 CFR 1926.454(a): The employer shall have each employee who performs work while on a scaffold trained by a person qualified in the subject matter to recognize the hazards associated with the type of scaffold being used and to understand the procedures to control or minimize those hazards. The training shall include the following areas, as applicable:  On or about February 20, 2020, employees using ladder jack scaffolds were not provided with training to ensure they were able to recognize and control the hazards associated with scaffold use.  Employees were exposed to fall hazards while working from the scaffold.   Abatement certification is required for this item in accordance with 1903.19(c).
Recent events (1)
  • — Z (S) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344726559.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.