Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,197,549Inspections Most recent open 2026-08-27 Last loaded 2026-08-31

OSHA Inspection: RANDALL E KLOCKE FARM

Fatality or catastrophe inspection · Safety discipline

On , OSHA opened a fatality or catastrophe safety inspection of RANDALL E KLOCKE FARM in 8702 HIGHWAY B, PALMYRA, MO 63461 (NAICS 111150). OSHA activity number 344743208.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Randall E Klocke Farm for free Get an email when a new federal OSHA severe-injury report for Randall E Klocke Farm is published. One employer, no account, unsubscribe in one click.
Site address
8702 HIGHWAY B
City
PALMYRA
State
MO
ZIP
63461
Mailing
384 COUNTY ROAD 401, PALMYRA, MO 63461
Inspection type
Fatality or catastrophe (M)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
Non-union (B)
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
111150
Employees
16
Ownership type
Private (A)

5 citations on file for this inspection.

5(a)(1)

Serious Gravity 10 1 instance 5 exposed
Issued
Aug 21, 2020
Penalty
Initial $5,398 · Current $2,699 Reduced
OSH ACT of 1970 Section (5)(a)(1): The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to engulfment hazards:  The employer is failing to prevent employee from exposure to engulfment hazards during grain bin activities.  The condition was most recently observed on about on or about May 5th, 2020 at a silo located at 8702 Highway B in Palmyra, MO.  Employees regularly entered grain silos/bins to check the condition and level off grain.
Recent events (2)
  • · I (S) $2699
  • · Z (S) $5398

5(a)(1)

Serious Gravity 5 3 instances 5 exposed
Issued
Aug 21, 2020
Penalty
Initial $3,856 · Current $1,928 Reduced
OSH ACT of 1970 Section (5)(a)(1):   The employer did not furnish employment and a place of employment which was free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that the employees were exposed to electrical hazards.  The employer is failing to prevent employee exposure to contact with electrical energy.  The condition was most recently observed on about on or about May 5th, 2020 at a silo located at 8702 Highway B in Palmyra, MO. The employees were exposed to the following electrical hazards:   a) A junction box and on the rear of the structure and a 220 VAC receptacle near the door on a silo located at 8702 Highway B in Palmyra, MO was not designed for outdoor use.   b)  Unused openings in cabinets, boxes, and fittings were not effectively closed.  A junction box on a silo, located at 8702 Highway B in Palmyra, MO, had unused openings and was missing a cover, exposing employees to live electrical parts.  c)  All pull boxes, junction boxes, and fittings were not provided with covers identified for the purpose.  A junction box on a silo, located at 8702 Highway B in Palmyra, MO, was not provided with a cover/markings identified for the purpose.
Recent events (2)
  • · I (S) $1928
  • · Z (S) $3856

1910.1200 E01

Serious Gravity 5 1 instance 5 exposed
Issued
Aug 21, 2020
Abate by
Oct 1, 2020
Penalty
Initial $3,856 · Current $1,928 Reduced
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in paragraphs (f), (g), and (h) of this section for labels and other forms of warning, safety data sheets, and employee information and training to be met: (Agriculture Reference: 1928.21(a)(5):    The employer is failing to prevent employee exposure to contact with hazardous chemicals through implementation of a hazard communication program.  The condition was most recently observed on about on or about May 5th, 2020 at a silo located at 8702 Highway B in Palmyra, MO on or about May 5th, 2020.  Randall E. Klocke Farm, had not developed and maintained a written hazard communication program.  Employees routinely used various pesticides, herbicides, and fungicides.
Recent events (2)
  • · I (S) $1928
  • · Z (S) $3856

1928.57 A06 V

Serious Gravity 5 1 instance 5 exposed
Issued
Aug 21, 2020
Abate by
Oct 1, 2020
Penalty
Initial $3,856 · Current $1,928 Reduced
29 CFR 1928.57(a)(6)(v): The employer did not provide instructions to the employees to lock out electrical power before performing maintenance or service on farmstead equipment.    The employer is failing to prevent employee exposure to struck-by, caught-in-between and electrical hazardous.  The condition was most recently observed on about on or about May 5th, 2020 at a silo located at 8702 Highway B in Palmyra, MO.  Randall E. Klocke Farm had not provided instructions to facilitate lock out of electrical power before performing maintenance or service on farmstead equipment.
Recent events (2)
  • · I (S) $1928
  • · Z (S) $3856

1928.57 C02 I

Serious Gravity 5 1 instance 3 exposed
Issued
Aug 21, 2020
Penalty
Initial $3,856 · Current $1,928 Reduced
29 CFR 1928.57(c)(2)(i): The mesh or nip-points of all power driven gears, belts, chains, sheaves, pulleys, sprockets, and idlers were not guarded.  The employer is failing to prevent employee exposure to struck-by and caught-in-between hazardous.  The condition was most recently observed on about on or about May 5th, 2020 at a silo located at 8702 Highway B in Palmyra, MO.  Randall E. Klocke Farm had not ensured one or more methods of machine guarding were provided to protect the operator and other employees in the machine area from hazards such as those created by ingoing mesh or nip points. A motor and auger used to remove grain from a 42 foot diameter silo did not have the pulleys and belt guarded.
Recent events (2)
  • · I (S) $1928
  • · Z (S) $3856

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 344743208.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.