ENDICOTT, NY ·
OSHA Inspection: SAM A. LUPO & SONS, INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of SAM A. LUPO & SONS, INC. in 1219 CAMPVILLE ROAD, ENDICOTT, NY 13763 (NAICS 311999). OSHA activity number 344745963.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SAM A. LUPO & SONS, INC.
- Site address
- 1219 CAMPVILLE ROAD
- City
- ENDICOTT
- State
- NY
- ZIP
- 13763
- Mailing
- P.O. BOX 5721, ENDICOTT, NY 13763
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 311999
- Employees
- 30
- Ownership type
- Private (A)
Citations
3 citations on file for this inspection.
1910.147 C04 I
- Issued
- Jul 14, 2020
- Abate by
- Aug 7, 2020
- Penalty
- Initial $6,747 · Current $5,398 Reduced
General-duty citation text
29 CFR 1910.147(c)(ii): The procedures shall clearly and specifically outline the scope, purpose, authorization, rules, and techniques to be utilized for the control of hazardous energy, and the means to enforce compliance. a) In the breast room, on or about 4/22/2020: An employee was cleaning the Multivac machine. Energy control procedures in place did not require authorized employees to perform lockout and tagout on the machines they are assigned to use. Abatement certification must be submitted for this item.
Recent events (3)
- · F (S) $5397.6
- · C (S) $6747
- · Z (S) $6747
1910.147 C07 I
- Issued
- Jul 14, 2020
- Abate by
- Aug 7, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(7)(i): The employer did not provide training to ensure that the purpose and function of the energy control program are understood by employees and that the knowledge and skills required for the safe application, usage, and removal of the energy controls are acquired by employees: a. In the breast room, on or about 4/22/2020: Employees cleaning equipment, including but not limited to the Multivac machine, without using energy control procedures. Employees were trained to use lockout applied by someone else and not themselves. Abatement certification must be submitted for this item.
Recent events (3)
- · F (S) $0
- · C (S) $0
- · Z (S) $0
1910.212 A03 II
- Issued
- Jul 14, 2020
- Abate by
- Aug 14, 2020
- Penalty
- Initial $8,501 · Current $0 Reduced
General-duty citation text
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): a. In the production area, breast room, on or about 4/22/2020: The point of operation on the MultiVac machine, model R126, serial number 140334, was not adequately guarded at the discharge chute to prevent employees from having any part of their body in the danger zone during operation.
Recent events (3)
- · F (S) $0
- · C (S) $8501
- · Z (S) $8501
More inspections in this industry (NAICS 311999)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 344745963.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.