WICHITA FALLS, TX —
OSHA Inspection: VITRO ARCHITECTURAL GLASS
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of VITRO ARCHITECTURAL GLASS in 7400 CENTRAL EAST FRWY, WICHITA FALLS, TX 76305 (NAICS 327211). OSHA activity number 344764626.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- VITRO ARCHITECTURAL GLASS
- Site address
- 7400 CENTRAL EAST FRWY
- City
- WICHITA FALLS
- State
- TX
- ZIP
- 76305
- Mailing
- 7400 CENTRAL EAST FRWY, WICHITA FALLS, TX 76305
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 327211
- Employees
- 400
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.66 G02 II
- Issued
- Jun 1, 2020
- Penalty
- Initial $4,916 · Current $2,950 Reduced
General-duty citation text
29 CFR 1910.66(g)(2)(ii): All parts of the equipment including control systems shall be inspected, and, where necessary, tested by a competent person at intervals specified by the manufacturer/supplier, but not to exceed 12 months, to determine that they are in safe operating condition. On the north west side of the shipping department, employees worked from a work platform that the employer did not conduct periodic inspections and test the control systems, exposing employees to struck-by and falling hazards.
Recent events (2)
- — I (O) $2949.6
- — Z (S) $4916
1910.66 G03 I
- Issued
- Jun 1, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.66(g)(3)(i): A maintenance inspection and, where necessary, a test shall be made of each platform installation every 30 days, or where the work cycle is less than 30 days such inspection and/or test shall be made prior to each work cycle. This inspection and test shall follow procedures recommended by the manufacturer, and shall be made by a competent person. On the north west side of the shipping department, employees worked from a work platform where the employer did not ensure maintenance inspections of the platform were completed as required every 30 days, exposing employees to struck-by and falling hazards.
Recent events (2)
- — I (O) $0
- — Z (S) $0
1910.66 G05 II
- Issued
- Jun 1, 2020
- Penalty
- Initial $7,711 · Current $4,627 Reduced
General-duty citation text
29 CFR 1910.66(g)(5)(ii): Suspension wire rope shall be inspected by a competent person for visible defects and gross damage to the rope before every use and after each occurrence which might affect the wire rope's integrity. On the north west side of the shipping department, employees worked from a work platform the employer did not inspect the suspension wire ropes for visual defects, exposing employees to struck-by and fall hazards.
Recent events (2)
- — I (O) $4626.6
- — Z (S) $7711
1910.66 G05 III
- Issued
- Jun 1, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.66(g)(5)(iii): A thorough inspection of suspension wire ropes in service shall be made once a month. Suspension wire ropes that have been inactive for 30 days or longer shall have a thorough inspection before they are placed into service. These thorough inspections of suspension wire ropes shall be performed by a competent person. On the north west side of the shipping department, employees worked from a work platform the employer did not ensure the wire ropes of the winches were inspected every month, exposing employees to to struck-by and fall hazards.
Recent events (2)
- — I (O) $0
- — Z (S) $0
1910.66 I01 II A
- Issued
- Jun 1, 2020
- Penalty
- Initial $4,916 · Current $2,950 Reduced
General-duty citation text
29 CFR 1910.66(i)(1)(ii)(A): All employees who operate working platforms shall be trained in recognition of and preventive measures for the safety hazards associated with their individual work task. On the north west side of the shipping department, employees operated and worked from a work platform the employer did not provide employees hazard recognition of hazards to prevent equipment failure, exposing employees to fall and struck-by hazards.
Recent events (2)
- — I (O) $2949.6
- — Z (S) $4916
1910.66 I01 IV
- Issued
- Jun 1, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.66(i)(1)(iv): Written work procedures for the operation, safe use and inspection of working platforms shall be provided for employee training. Pictorial methods of instruction, may be used, in lieu of written work procedures, if employee communication is improved using this method. The operating manuals supplied by manufacturers for platform system components can serve as the basis for these procedures. On the north west side of the shipping department, the employer did not provide required training to employees on the safe operation and required inspections of working platforms prior to use, exposing the employees to fall and struck-by hazards.
Recent events (2)
- — I (O) $0
- — Z (S) $0
More inspections at Vitro Architectural Glass
View Vitro Architectural Glass's full OSHA safety record →
More inspections in this industry (NAICS 327211)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344764626.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.