OSHA Inspection: THE CARPENTER'S SHOP

Issued

2020-07-01 00:00:00

Abate by

2020-08-18 00:00:00

Penalty

Initial $1561.00 · Current $1000.00 Reduced

General-duty citation text

29 CFR 1910.213(r)(4): Suitable guard(s) were not provided to reduce to a minimum the hazard due to the point of operation of the miter chop saw:    a) Production area: The lower portion of the blade on the CTD miter chop saw was not properly guarded when the saw was actuated to perform wood cutting, as observed on or about June 4, 2020.    Abatement Certification Required.

Issued

2020-07-01 00:00:00

Abate by

2020-08-18 00:00:00

Penalty

Initial $1561.00 · Current $1000.00 Reduced

General-duty citation text

29 CFR 1910.147(d)(4)(i): Lockout or tagout devices were not affixed to each energy isolating device by authorized employees:    a) Production area: Lockout or tagout devices were not affixed to each energy isolating device by authorized employees when maintaining or servicing woodworking equipment including, but not limited to, saws, moulder and dust collection system, on or about June 4, 2020.    Abatement Certification Required.

Issued

2020-07-01 00:00:00

Abate by

2020-08-18 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed:  a) Production area: The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed, on or about June 4, 2020.  Abatement Certification Required.

Issued

2020-07-01 00:00:00

Abate by

2020-08-18 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.147(c)(7)(iv): The employer did not certify that employee training had been accomplished and kept up to date:  a) Production area: The employer did not certify that employee training had been accomplished and kept up to date, on or about June 4, 2020.  Abatement Certification Required.

Issued

2020-07-01 00:00:00

Abate by

2020-08-18 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.178(l)(6): The employer did not certify that each operator has been trained and evaluated as required by this paragraph (l):  a) Production/Warehouse: The employer did not certify that each powered industrial truck (PIT) operator has been trained and evaluated, on or about June 4, 2020.  Abatement Certification Required.

Issued

2020-07-01 00:00:00

Abate by

2020-08-18 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.334(a)(2)(ii): There was a defect or evidence of damage that could have exposed an employee to injury and the defective or damaged item was not removed from service:  a) Production area: An electrical extension cord was damaged (cut through outer insulating cover) and was not removed from service, as observed on or about June 4, 2020.  Abatement Certification Required.