TYLER, TX ·
OSHA Inspection: SCOTT JENKINS
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of SCOTT JENKINS in 1901-3 STONECREST BLVD., TYLER, TX 75707 (NAICS 238130). OSHA activity number 344778089.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SCOTT JENKINS
- Site address
- 1901-3 STONECREST BLVD.
- City
- TYLER
- State
- TX
- ZIP
- 75707
- Mailing
- 6940 CR 2301, TYLER, TX 75707
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238130
- Employees
- 5
- Ownership type
- Private (A)
Citations
4 citations on file for this inspection.
1926.300 B01
- Issued
- Jun 17, 2020
- Abate by
- Jul 14, 2020
- Penalty
- Initial $2,892 · Current $1,446 Reduced
General-duty citation text
29 CFR 1926.300(b)(1): Power operated tool(s), designed to accommodate guards, were not equipped with such guards when in use: (a) On or about June 8, 2020 employees at the site were exposed to amputation hazards when the saw blade guard on the Makita circular saw was wedged back with a piece of wood preventing the guard from functioning.
Recent events (2)
- · I (S) $1446
- · Z (S) $2892
1926.403 B01 II
- Issued
- Jun 17, 2020
- Abate by
- Jul 14, 2020
- Penalty
- Initial $3,470 · Current $1,735 Reduced
General-duty citation text
29 CFR 1926.403(b)(1)(ii): Safety of equipment was not determined on the basis of mechanical strength and durability, including, for parts designed to enclose and protect other equipment, the adequacy of the protection thus provided: a) On or about June 8, 2020 employees at the site were exposed to electrical shock/burns when accessing receptacles in the breaker box which was not closed to protect electrical components inside.
Recent events (2)
- · I (S) $1735
- · Z (S) $3470
1926.405 G02 IV
- Issued
- Jun 17, 2020
- Abate by
- Jul 14, 2020
- Penalty
- Initial $3,470 · Current $0 Reduced
General-duty citation text
29 CFR 1926.405(g)(2)(iv): Flexible cords were not connected to devices and fittings so that strain relief is provided to prevent pull from being directly transmitted to joints or terminal screws: (a) On or about June 8, 2020 employees at the site were exposed to electrical shock/burn hazards when using a flexible cable with exposed conductors where strain relief was not provided.
Recent events (2)
- · I (S) $0
- · Z (S) $3470
1926.501 B13
- Issued
- Jun 17, 2020
- Abate by
- Jul 14, 2020
- Penalty
- Initial $4,048 · Current $2,024 Reduced
General-duty citation text
29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b): (a) On or about June 8, 2020 employees at the site were exposed to fall hazards greater than 6 ft. when installing a dormer on the roof without fall protection.
Recent events (2)
- · I (S) $2024
- · Z (S) $4048
More inspections in this industry (NAICS 238130)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 344778089.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.