Safety Incidents OSHA Severe Injury Reports · 2015–2025
2,004,209Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: BRANDON AUTOMOTIVE, INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of BRANDON AUTOMOTIVE, INC. in 5600 S BROADWAY, LITTLETON, CO 80121 (NAICS 441110). OSHA activity number 344781570.

Watch Brandon Automotive, INC. — free Get an email when a new federal OSHA severe-injury report for Brandon Automotive, INC. is published. One employer, no account, unsubscribe in one click.
Site address
5600 S BROADWAY
City
LITTLETON
State
CO
ZIP
80121
Mailing
5600 S BROADWAY, LITTLETON, CO 80121
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
441110
Employees
98
Ownership type
A

3 citations on file for this inspection.

1910.28 B08 II

Serious Gravity 1 1 instance 10 exposed
Issued
Abate by
Penalty
Initial $3441.00 · Current $1706.00 Reduced
29 CFR 1910.28(b)(8)(ii): The employer did not apply floor markings at least 6 feet (1.8 m) from the edge of the pit in colors that contrast with the surrounding area; or place a warning line at least 6 feet (1.8 m) from the edge of the pit as well as stanchions that are capable of resisting, without tipping over, a force of at least 16 pounds (71 N) applied horizontally against the stanchion at a height of 30 inches (76 cm); or place a combination of floor markings and warning lines at least 6 feet (1.8 m) from the edge of the pit:    a) Brandon Automotive Service Area: On or about June 10, 2020, and at times prior, employees were exposed to fall hazards of 11 inches while walking and working near the alignment pit. Pit access was not limited within 6 feet of the edge, floor markings were not applied, and no caution signs were visible.
Recent events (2)
  • — I (S) $1705.5
  • — Z (S) $3441

1910.212 A01

Deleted Serious Gravity 1 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $3441.00 · Current $0.00 Reduced
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:  a) Brandon Automotive Service Area: On or about June 10, 2020, and at times prior, employees were exposed to struck by hazards while pressing automotive parts with an unguarded Carolina 30-ton capacity Heavy Duty Press.
Recent events (2)
  • — I (S) $0
  • — Z (S) $3441

1910.1200 F06 II

Other-than-serious 1 instance 5 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.1200(f)(6)(ii): The employer did not ensure that each container of hazardous chemicals in the workplace was labeled, tagged or marked with the appropriate hazard warnings:  a) Brandon Automotive Service area: On or about June 10, 2020, and at times prior, employees were exposed to chemical hazards while working with chemicals such as, but not limited to: MOC Products Company A.P.C. All Purpose Cleaner (Butoxyethanol, Potassium Hydroxide), MOC Products Company Clean and Clear Glass Cleaner (2-Butoxyethanol) and Malco Clean and Shine (Dodecyldimethylamine oxide). The employer failed to ensure that each container of hazardous chemicals in the workplace was labeled with the product identifier and words, pictures, symbols, or combination thereof, which provides at least general information regarding the hazards of the chemicals.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344781570.