OSHA Inspection: TBC MFG. INC

Issued

2020-10-09 00:00:00

Abate by

2020-12-15 00:00:00

Penalty

Initial $2313.00 · Current $1300.00 Reduced

General-duty citation text

29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:  (a) TBC Mfg, Inc. dba Tube Bending Concepts, 6140 Champlin Drive, PO Box 356, Fountain CO 80817:  On or about June 19, 2020, and at times prior, employees were exposed to point of operation hazards while using the MSC Manual Mill.  (b) TBC Mfg, Inc. dba Tube Bending Concepts, 6140 Champlin Drive, PO Box 356, Fountain CO 80817:  On or about June 19, 2020, and at times prior, employees were exposed to point of operation hazards while using the Vectrax Manual Mill.  (c) TBC Mfg, Inc. dba Tube Bending Concepts, 6140 Champlin Drive, PO Box 356, Fountain CO 80817:  On or about June 19, 2020, and at times prior, employees were exposed to point of operation hazards while using the Bridgeport Manual Mill.  Abatement Note: Abatement certification and documentation are required for this item (see enclosed Certification of Corrective Action Worksheet).

Issued

2020-10-09 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1904.40(a): The employer did not provide an authorized government representative the records within the four business hours:  (a) TBC Mfg, Inc. dba Tube Bending Concepts, 6140 Champlin Drive, PO Box 356, Fountain CO 80817:  On or about June 19, 2020, and at times prior, the employer did not provide the OSHA form 300, OSHA form 300A, and OSHA form 301 or equivalent within four business hours of the initial or subsequent requests.

Issued

2020-10-09 00:00:00

Abate by

2020-11-12 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.178(l)(6): The employer did not certify that each operator has been trained and evaluated as required by this paragraph (l):  (a) TBC Mfg, Inc. dba Tube Bending Concepts, 6140 Champlin Drive, PO Box 356, Fountain CO 80817: On or about June 19, 2020, and at times prior, the employer did not certify forklift operators after they had been trained and evaluated on forklift use in the workplace.  Abatement Note: Abatement certification is required for this item (see enclosed Certification of Corrective Action Worksheet).