CALDWELL, ID —
OSHA Inspection: FRESCA MEXICAN FOODS, LLC
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of FRESCA MEXICAN FOODS, LLC in 2009 SMEED PKWY, CALDWELL, ID 83605 (NAICS 311830). OSHA activity number 344809827.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- FRESCA MEXICAN FOODS, LLC
- Site address
- 2009 SMEED PKWY
- City
- CALDWELL
- State
- ID
- ZIP
- 83605
- Mailing
- 2009 SMEED PKWY, CALDWELL, ID 83605
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 311830
- Employees
- 150
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.147 C04 II A
- Issued
- Aug 14, 2020
- Abate by
- Sep 10, 2020
- Penalty
- Initial $10,929 · Current $10,929
General-duty citation text
29 CFR 1910.147(c)(4)(ii)(A): The energy control procedures did not contain a specific statement on the intended use of the procedure. (a) Production Line 1: On June 26, 2020 and at times prior thereto; the employer did not ensure that lockout/tagout procedures stated when they were to be utilized, such as when servicing and/or maintaining production lines, exposing employees to potential hazardous energies. (b) Production Line 4: On June 26, 2020 and at times prior thereto; the employer did not ensure that lockout/tagout procedures stated when they were to be utilized, such as when clearing jams from the AM Manufacturing Ball Loader, 24-ON Press Loader, #26409, exposing employees to potential hazardous energies. NOTE: Abatement certification AND documentation are required for this item.
Recent events (2)
- — I (S) $10929
- — Z (S) $10929
1910.147 C06 I
- Issued
- Aug 14, 2020
- Abate by
- Sep 10, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(6)(i): The employer did not conduct an annual or more frequent inspection of the energy control procedure to ensure that the procedure and requirements of this standard were followed: (a) Production Line 4: On June 26, 2020 and at times prior thereto; the employer did not protect employees in that employees cleared jams from the AM Manufacturing Ball Loader, 24-ON Press Loader, #26409 without controlling potential hazardous energies. (b) Production Line 1: On June 26, 2020 and at times prior thereto; the employer did not protect employees in that employees serviced and/or maintained production lines without controlling potential hazardous energies. NOTE: Abatement certification AND documentation are required for this item.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.147 C07 III B
- Issued
- Aug 14, 2020
- Abate by
- Sep 10, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(7)(iii)(B): Additional retraining was not provided whenever a periodic inspection under 29 CFR 1910.147(c)(6) revealed, or whenever the employer had reason to believe, that there were deviations from or inadequacies in the employee's knowledge or use of the energy control procedures: (a) Production Line 4: On June 26, 2020 and at times prior thereto; the employer did not protect employees in that employees cleared jams from the AM Manufacturing Ball Loader, 24-ON Press Loader, #26409 without controlling potential hazardous energies. NOTE: Abatement certification AND documentation are required for this item.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.147 D04 I
- Issued
- Aug 14, 2020
- Abate by
- Sep 10, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(d)(4)(i): Lockout or tagout devices were not affixed to each energy isolating device by authorized employees: (a) Production Line 4: On May 11, 2020; the employer did not protect employees in that employees cleared jams from the AM Manufacturing Ball Loader, 24-ON Press Loader, #26409 without applying a lockout or tagout device. NOTE: Abatement certification AND documentation are required for this item.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.212 A01
- Issued
- Aug 14, 2020
- Abate by
- Sep 10, 2020
- Penalty
- Initial $10,929 · Current $0 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: (a) Production Line 4: On June 26, 2020 and at times prior thereto; the employer did not protect employees in that the AM Manufacturing Ball Loader, 24-ON Press Loader, #26409 was not guarded. NOTE: Abatement certification AND documentation are required for this item.
Recent events (2)
- — I (S) $0
- — Z (S) $10929
More inspections at Fresca Mexican Foods, LLC
View Fresca Mexican Foods, LLC's full OSHA safety record →
More inspections in this industry (NAICS 311830)
More inspections in ID
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344809827.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.