Safety Incidents OSHA Severe Injury Reports · 2015–2025
4,113,118Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: DAN ELLIS

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of DAN ELLIS in 2644 JUPITER DRIVE, FAIRFIELD, OH 45014 (NAICS 238160). OSHA activity number 344812284.

Watch DAN Ellis — free Get an email when a new federal OSHA severe-injury report for DAN Ellis is published. One employer, no account, unsubscribe in one click.
Establishment
DAN ELLIS
Site address
2644 JUPITER DRIVE
City
FAIRFIELD
State
OH
ZIP
45014
Mailing
6800 MULLEN RD., CINCINNATI, OH 45247
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238160
Employees
5
Ownership type
A

3 citations on file for this inspection.

1926.501 B13

Serious Gravity 10 1 instance 4 exposed
Issued
Abate by
Penalty
Initial $4048.00 · Current $700.00 Reduced
29 CFR 1926.501(b)(13): "Residential construction." Each employee engaged in residential construction activities 6 feet (1.8 m) or more above lower levels shall be protected by guardrail systems, safety net system, or personal fall arrest system unless another provision in paragraph (b) of this section provides for an alternative fall protection measure. Exception: When the employer can demonstrate that it is infeasible or creates a greater hazard to use these systems, the employer shall develop and implement a fall protection plan which meets the requirements of paragraph (k) of 1926.502.  Note: There is a presumption that it is feasible and will not create a greater hazard to implement at least one of the above-listed fall protection systems. Accordingly, the employer has the burden of establishing that it is appropriate to implement a fall protection plan which complies with 1926.502(k) for a particular workplace situation, in lieu of implementing any of those systems.  a.)  On or about June 25, 2020, employees were exposed to a 16 foot 5 inch and a 16 foot 9 inch fall hazard while performing roofing work on a 4/12 low-sloped residential roof and not using conventional fall protection.
Recent events (3)
  • — F (S) $700
  • — C (S) $4048
  • — Z (S) $4048

1926.502 A02

Serious Gravity 10 1 instance 4 exposed
Issued
Abate by
Penalty
Initial $4048.00 · Current $700.00 Reduced
29 CFR 1926.502(a)(2): Employers shall provide and install all fall protection systems required by this subpart for an employee, and shall comply with all other pertinent requirements of this subpart before that employee begins the work that necessitates the fall protection.  a.) On or about June 25, 2020, the employer failed to install all fall protection systems before employees began working on a 16 foot 9 inch high single family residential roof.
Recent events (3)
  • — F (S) $700
  • — C (S) $4048
  • — Z (S) $4048

1926.503 A01

Serious Gravity 10 1 instance 5 exposed
Issued
Abate by
Penalty
Initial $4048.00 · Current $600.00 Reduced
29 CFR 1926.503(a)(1): The employer shall provide a training program for each employee who might be exposed to fall hazards. The program shall enable each employee to recognize the hazards of falling and shall train each employee in the procedures to be followed in order to minimize these hazards.  a.) On or about June 25, 2020, employees were not trained to recognize fall hazards such as, but not limited to, a 16 foot 5 inch and 16 foot 9 inch fall hazard while performing roofing work on a 4/12 pitched church roof, nor were they trained on when to utilize a fall protection system.
Recent events (3)
  • — F (S) $600
  • — C (S) $4048
  • — Z (S) $4048

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344812284.