NATCHEZ, MS —
OSHA Inspection: GREAT RIVER INDUSTRIES, LLC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of GREAT RIVER INDUSTRIES, LLC. in 21 MORAN RD., NATCHEZ, MS 39120 (NAICS 332313). OSHA activity number 344881438.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- GREAT RIVER INDUSTRIES, LLC.
- Site address
- 21 MORAN RD.
- City
- NATCHEZ
- State
- MS
- ZIP
- 39120
- Mailing
- 21 MORAN RD., NATCHEZ, MS 39120
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332313
- Employees
- 30
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.212 A03 II
- Issued
- Feb 2, 2021
- Abate by
- Feb 25, 2021
- Penalty
- Initial $11,605 · Current $11,605
General-duty citation text
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): Or in the alternative: 29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: (a) Fabrication Shop - During the period of March 1, 2020 through August 6, 2020 the employer allowed employee(s) to tape carpet on Bertsch plate roll machines while the machines operated without machine guarding exposing employees to amputation hazards created by in going nip points of rotating parts. Control levers were taped down in a manner that allowed the machines to run without an employee operating the control during the process of taping the rolls.
Recent events (2)
- — I (O) $11605
- — Z (S) $11605
1910.303 F01
- Issued
- Feb 2, 2021
- Abate by
- Feb 25, 2021
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.303(f)(1): Each disconnecting means required by Subpart S of Part 1910 for motors and appliances was not legibly marked to indicate its purpose, nor located and arranged so the purpose was evident: (a) West end Bay 2 - On or about August 13 , 2020 the employer failed to label disconnects that were not positioned to clearly identify what they controlled exposing employees to physical injury.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.305 G01 IV B
- Issued
- Feb 2, 2021
- Abate by
- Feb 25, 2021
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(g)(1)(iv)(B): Flexible cords and cables were used where run through holes in walls, ceilings, or floors: West end of bay - On or about August 13, 2020, flexible cord powering a gas level sensor for a carbon dioxide tank was run through hole in a metal wall panel near Bertsch plate roll exposing employees to electrical shock hazards.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.305 G02 III
- Issued
- Feb 2, 2021
- Abate by
- Feb 25, 2021
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(g)(2)(iii):Flexible cords were not connected to devices and fittings so that tension would not be transmitted to joints or terminal screws: (a) West end of Bay 2 - On or about August 13, 2020 flexible cords entering Bertsch electrical control panel did not have strain relief due to armored coating being damaged exposing employees to burn hazard. (b) West end of Bay 2, south wall - On or about August 13, 2020 flexible cords powering duplex receptacle in a metal box did not have strain relief due to the box not being connect connected to the conduit exposing employees to burn hazards.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.1030 F01 I
- Issued
- Feb 2, 2021
- Abate by
- Feb 25, 2021
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1030(f)(1)(i): The employer did not make available the hepatitis B vaccine and vaccination series to all employees who have occupational exposure: Plant site - On or about August 13, 2020 the employer failed to offer designated 1st responders the hepatitis B vaccination series exposing employees to illness.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Great River Industries, LLC.
View Great River Industries, LLC.'s full OSHA safety record →
More inspections in this industry (NAICS 332313)
More inspections in MS
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344881438.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.