Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,191,871Inspections Most recent open 2026-07-30 Last loaded 2026-08-03

OSHA Inspection: FLUSHING IRON WELD INC.

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of FLUSHING IRON WELD INC. in 165 WILLIAM ST, NEW YORK, NY 10038 (NAICS 238190). OSHA activity number 344886866.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Flushing Iron Weld INC. for free Get an email when a new federal OSHA severe-injury report for Flushing Iron Weld INC. is published. One employer, no account, unsubscribe in one click.
Site address
165 WILLIAM ST
City
NEW YORK
State
NY
ZIP
10038
Mailing
131-25 MAPLE AVE, FLUSHING, NY 11355
Inspection type
Complaint (B)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238190
Employees
20
Ownership type
A

3 citations on file for this inspection.

1926.403 I02 I

Deleted Serious Gravity 5 1 instance 2 exposed
Issued
Dec 9, 2020
Penalty
Initial $3,856 · Current $0 Reduced
29 CFR  1926.403(i)(2)(i):Live parts of electric equipment operating at 50 volts or more were not guarded against accidental contact by cabinets or other forms of enclosures, nor by any of the means listed in subparagraphs (A) through (D) of this paragraph.  a) Employees were exposed to electric shock hazard; there was an exposed live wire tip/terminal screw on the wall mounted light switch inside the doorway to the construction area, the elevator motor room (roof house); the light switch box did not have a cover and there was no tape over the live wire terminal screws.   Location: 165 William St, NY NY 10038   On or about 8-13-2020  NOTE: BECAUSE ABATEMENT OF THIS VIOLATION IS ALREADY DOCUMENTED IN THE CASEFILE, THE EMPLOYER NEED NOT SUBMIT CERTIFICATION NOR DOCUMENTATION OF ABATEMENT OF THIS VIOLATION AS NORMALLY REQUIRED BY 29 CFR 1903.19.
Recent events (2)
  • · I (S) $0
  • · Z (S) $3856

1926.405 G02 IV

Deleted Serious Gravity 5 1 instance 2 exposed
Issued
Dec 9, 2020
Penalty
Initial $0 · Current $0
29 CFR  1926.405(g)(2)(iv):Flexible cords were not connected to devices and fittings so that strain relief is provided to prevent pull from being directly transmitted to joints or terminal screws:  a) Employees were exposed to electric shock hazard due to damaged wiring; the metal conduit wire covering was separated exposing the inner wires to sharp edges/damage; on the fire alarm wiring located over the door to the elevator roof house.    Location: 165 William St, NY NY 10038   On or about 8-13-2020  NOTE: BECAUSE ABATEMENT OF THIS VIOLATION IS ALREADY DOCUMENTED IN THE CASEFILE, THE EMPLOYER NEED NOT SUBMIT CERTIFICATION NOR DOCUMENTATION OF ABATEMENT OF THIS VIOLATION AS NORMALLY REQUIRED BY 29 CFR 1903.19.
Recent events (2)
  • · I (S) $0
  • · Z (S) $0

5(a)(1)

Serious Gravity 5 1 instance 2 exposed
Issued
Dec 9, 2020
Abate by
Jan 6, 2021
Penalty
Initial $3,856 · Current $2,750 Reduced
29 CFR  OSH ACT of 1970 Section (5)(a)(1): Section 5(a)(1) of the Occupational Safety and Health Act: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees, in that employees were not protected from the hazard struck by/crush hazard by an elevator which was not locked out.   a) Employees were exposed to struck-by/ caught-by hazard from sudden start-up of the elevator machine (pulleys and cables) due to the elevator not being shut down or guarded during rebuilding of the elevator motor roof house.   Location: 165 William St, NY NY 10038   On or about 8-13-2020
Recent events (2)
  • · I (S) $2750
  • · Z (S) $3856

View Flushing Iron Weld INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344886866.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.