Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: MIDWEST THIRD PARTY LOGISTICS, INC.

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of MIDWEST THIRD PARTY LOGISTICS, INC. in 2526 SHINSKE RD. W, SAVANNA, IL 61074 (NAICS 493130). OSHA activity number 344892930.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Midwest Third Party Logistics, INC. — free Get an email when a new federal OSHA severe-injury report for Midwest Third Party Logistics, INC. is published. One employer, no account, unsubscribe in one click.
Site address
2526 SHINSKE RD. W
City
SAVANNA
State
IL
ZIP
61074
Mailing
2526 SHINSKE, SAVANNA, IL 61074
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
493130
Employees
20
Ownership type
A

5 citations on file for this inspection.

1910.147 C01

Serious Gravity 5 1 instance 4 exposed
Issued
Sep 29, 2020
Abate by
Nov 5, 2020
Penalty
Initial $6,747 · Current $5,398 Reduced
29 CFR 1910.147(c)(1): Energy control program. The employer shall establish a program consisting of energy control procedures, employee training and periodic inspections to ensure that before any employee performs any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative.  Seed warehouse, seed processing equipment - on or about August 21, 2020, the hazardous energy control "lockout tagout" program was not established in the workplace for servicing tasks performed by employees on equipment that was not safely de-energized. Employees had their hands exposed to machine caught-in hazards likely to result in serious injury when reaching into the point-of-operation and associated danger zone to remove jammed bags.  Abatement documentation is required for this item in accordance with the requirements of 29 CFR 1903.19(d).
Recent events (2)
  • — I (S) $5398
  • — Z (S) $6747

1910.176 B

Other-than-serious 1 instance 4 exposed
Issued
Sep 29, 2020
Penalty
Initial $6,747 · Current $0 Reduced
29 CFR 1910.176(b): Secure storage. Storage of material shall not create a hazard. Bags, containers, bundles, etc., stored in tiers shall be stacked, blocked, interlocked and limited in height so that they are stable and secure against sliding or collapse.  Seed warehouse: on or about August 21, 2020, employees working in the area and walking by the unstable three-tiered stack of palletized seed bags were exposed to struck-by and/or crushed-under hazards because load was not securely stored to prevent leaning, sliding, and collapsing.  There is no abatement documentation or certification required for this item.
Recent events (2)
  • — I (O) $0
  • — Z (S) $6747

1910.141 A05

Other-than-serious 1 instance 5 exposed
Issued
Sep 29, 2020
Abate by
Nov 5, 2020
Penalty
Initial $0 · Current $0
29 CFR 1910.141(a)(5): Vermin control. Every enclosed workplace shall be so constructed, equipped, and maintained, so far as reasonably practicable, as to prevent the entrance or harborage of rodents, insects, and other vermin. A continuing and effective extermination program shall be instituted where their presence is detected.  Seed warehouse: on or about August 21, 2020, employees were exposed to mice infestation when handling palletized loads of seed bags. Implemented pest control program did not effectively exterminate rodents present in the warehouse and likely required additional efforts such as, but not limited to, increased number of baits, traps, and building maintenance and housekeeping efforts.  Abatement certification is required of this item in accordance with the requirements of 29 CFR 1903.19(c).
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1910.178 L01 I

Other-than-serious 1 instance 6 exposed
Issued
Sep 29, 2020
Abate by
Nov 5, 2020
Penalty
Initial $0 · Current $0
29 CFR 1910.178(l)(1)(i): The employer shall ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l).  Forklifts and front-end wheel loaders with fork attachments: on or about Friday, August 21, 2020, employees assigned to operate forklifts and wheel loaders equipped with forks for material handling tasks did not receive complete initial operator training consisting of formal instruction and practical training in truck and workplace related topics, along with an evaluation in safe operation prior to being released for regular work duties.  Abatement documentation is required for this item in accordance with the requirements of 29 CFR 1903.19(d).
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1910.1200 E01

Other-than-serious 1 instance 3 exposed
Issued
Sep 29, 2020
Abate by
Nov 5, 2020
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met:  Seed warehouse, seed processing equipment - on or about August 21, 2020, the hazard communication program was not established in the workplace to provide for hazardous material labels and other forms of warning, accessible safety data sheets, and employee information and training related to all aspects of handling talc powder and treated seeds which exposed employees to respiratory difficulties and skin irritation.  Abatement documentation is required for this item in accordance with the requirements of 29 CFR 1903.19(d).
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View Midwest Third Party Logistics, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344892930.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.