FOWLER, OH ·
OSHA Inspection: STANWADE METAL PRODUCTS INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of STANWADE METAL PRODUCTS INC. in 6868 STATE ROUTE 305, FOWLER, OH 44418 (NAICS 332420). OSHA activity number 344897376.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- STANWADE METAL PRODUCTS INC.
- Site address
- 6868 STATE ROUTE 305
- City
- FOWLER
- State
- OH
- ZIP
- 44418
- Mailing
- P.O BOX 10, HARTFORD, OH 44424
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332420
- Employees
- 50
- Ownership type
- Private (A)
Citations
5 citations on file for this inspection.
1910.67 C02 V
- Issued
- Sep 30, 2020
- Penalty
- Initial $5,735 · Current $2,500 Reduced
General-duty citation text
29 CFR 1910.67(c)(2)(v): A personal fall arrest or travel restraint system that meets the requirements in subpart I of this part was not worn and attached to the boom or basket when working from an aerial lift: On or about August 25, 2020, the employer did not ensure a personal fall arrest system was used when working from an aerial lift while unhooking straps from large tanks.
Recent events (2)
- · I (S) $2500
- · Z (S) $5735
1910.178 A04
- Issued
- Sep 30, 2020
- Penalty
- Initial $4,588 · Current $2,500 Reduced
General-duty citation text
29 CFR 1910.178(a)(4): Modifications and additions which affect capacity and safe operation of powered industrial truck were performed by the employer without the manufacturer's prior written approval: On or about August 25, 2020, the employer made modifications to the powered industrial truck without manufacturer's approval. The employer was using lifting equipment designed and constructed by the employer to lift and move tanks and hoist personnel.
Recent events (2)
- · I (S) $2500
- · Z (S) $4588
1910.178 A05
- Issued
- Sep 30, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(a)(5): The powered industrial truck was equipped with front-end attachments other than factory installed attachments, however the employer did not request that the truck be marked to identify the attachments and show the approximate weight of the truck and attachment combination at maximum elevation with load laterally centered: On or about August 25, 2020, the powered industrial truck was equipped with other than factory attachments and the employer did not ensure the truck was properly marked. The employer was using lifting equipment designed and constructed by the employer to lift and move tanks and hoist personnel.
Recent events (2)
- · I (S) $0
- · Z (S) $0
1910.184 E03 I
- Issued
- Sep 30, 2020
- Penalty
- Initial $4,588 · Current $0 Reduced
General-duty citation text
29 CFR 1910.184(e)(3)(i): Thorough periodic inspections of alloy steel chain slings in use were not made on a regular basis: On or about August 25, 2020, the employer did not conduct periodic inspections of all alloy steel chain slings.
Recent events (2)
- · I (O) $0
- · Z (S) $4588
1910.184 E03 II
- Issued
- Sep 30, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.184(e)(3)(ii): Records of the most recent month in which each alloy steel chain sling was thoroughly inspected were not available for examination: On or about August 25, 2020, the employer did not maintain inspection records of alloy steel chain slings.
Recent events (2)
- · I (O) $0
- · Z (S) $0
More inspections at Stanwade Metal Products INC.
View Stanwade Metal Products INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332420)
More inspections in OH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 344897376.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.