MERIDIAN, ID ·
OSHA Inspection: AGT FRAMING, LLC
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of AGT FRAMING, LLC in 161 ICEBERG LAKE, MERIDIAN, ID 83642 (NAICS 238130). OSHA activity number 344898457.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- AGT FRAMING, LLC
- Site address
- 161 ICEBERG LAKE
- City
- MERIDIAN
- State
- ID
- ZIP
- 83642
- Mailing
- 9207 W HEARTHSIDE DR., BOISE, ID 83709
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238130
- Employees
- 3
- Ownership type
- Private (A)
Citations
3 citations on file for this inspection.
1926.501 B13
- Issued
- Oct 9, 2020
- Abate by
- Oct 19, 2020
- Penalty
- Initial $2,313 · Current $1,619 Reduced
General-duty citation text
29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b): a) Residential construction: On or about August 26, 2020, a framer attaching sheathing to a 6:12 roof of a two story home was not utilizing a fall protection system and was exposed to a fall of 17-22 feet. Note* Abatement certification IS required for this item.
Recent events (2)
- · I (S) $1619.1
- · Z (S) $2313
1926.21 B02
- Issued
- Oct 9, 2020
- Abate by
- Oct 19, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.21(b)(2): The employer did not instruct each employee in the recognition and avoidance of unsafe conditions and the regulations applicable to his/her environment to control or eliminate any hazards or other exposure to illness or injury: a) Residential construction: On or about August 26, 2020, an anchorage point was not properly established and a framer's lanyard was too short for the work being performed; attaching sheathing to a 6:12 roof of a two story home at heights ranging from 17-22 feet. Note* Abatement certification IS required for this item.
Recent events (2)
- · I (S) $0
- · Z (S) $0
1926.1053 B01
- Issued
- Oct 9, 2020
- Abate by
- Oct 19, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.1053(b)(1): Where (a) portable ladder(s) was/were used for access to an upper level landing surface and the ladder's length did not allow the ladder side rails to extend at least 3 feet (0.9 m) above the upper landing surface being accessed, the ladder was not secured at its top to a rigid support that will not deflect, and/or a grasping device was not provided to assist employees in mounting and dismounting the ladder. a) On or about August 26, 2020, and at times prior thereto; a Little Giant Leveler Ladder was used as an extension ladder inside an interior stairwell of a two-story new residential build, but had only one rung extended. Note* Abatement certification IS required for this item.
Recent events (2)
- · I (O) $0
- · Z (O) $0
More inspections in this industry (NAICS 238130)
More inspections in ID
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 344898457.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.