HOBART, WI ·
OSHA Inspection: SUMMIT PUMP, INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of SUMMIT PUMP, INC. in 3168 COUNTY HIGHWAY GE, HOBART, WI 54155 (NAICS 333911). OSHA activity number 344898663.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SUMMIT PUMP, INC.
- Site address
- 3168 COUNTY HIGHWAY GE
- City
- HOBART
- State
- WI
- ZIP
- 54155
- Mailing
- 3168 COUNTY HIGHWAY GE, HOBART, WI 54155
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 333911
- Employees
- 54
- Ownership type
- Private (A)
Citations
3 citations on file for this inspection.
1910.151 C
- Issued
- Oct 21, 2020
- Abate by
- Nov 19, 2020
- Penalty
- Initial $5,398 · Current $0 Reduced
General-duty citation text
29 CFR 1910.151(c): Where the eyes or body of any person may be exposed to injurious corrosive materials, suitable facilities for quick drenching or flushing of the eyes and body shall be provided within the work area for immediate emergency use. On or about August 25, 2020 and prior, employees performing maintenance on the electric forklifts were exposed to corrosive liquid when adding water without an eye wash station in close proximity.
Recent events (2)
- · I (S) $0
- · Z (S) $5398
1910.243 C03
- Issued
- Oct 21, 2020
- Abate by
- Dec 31, 2020
- Penalty
- Initial $5,398 · Current $3,239 Reduced
General-duty citation text
29 CFR 1910.243(c)(3): Vertical portable grinders. Safety guards used on machines known as right angle head or vertical portable grinders shall have a maximum exposure angle of 180 deg., and the guard shall be so located so as to be between the operator and the wheel during use. Adjustment of guard shall be such that pieces of an accidentally broken wheel will be deflected away from the operator. (See Figure P-4.) (For Figure P-4, http://www.osha.gov/OshStd_gif/10PFP_4.gif) (a) In Building 4/Paint Shop, DeWalt 4.5 inch portable angle grinder used to cut product did not have a guard exposing employees to struck by hazards. (b) In Building 4/Paint Shop, Milwaukee 4.5 inch portable angle grinder used to smooth product did not have a guard exposing employees to struck by hazards.
Recent events (2)
- · I (S) $3238.8
- · Z (S) $5398
1910.178 Q07
- Issued
- Oct 21, 2020
- Abate by
- Nov 19, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(q)(7): Industrial trucks shall be examined before being placed in service, and shall not be placed in service if the examination shows any condition adversely affecting the safety of the vehicle. Such examination shall be made at least daily. Where industrial trucks are used on a round-the-clock basis, they shall be examined after each shift. Defects when found shall be immediately reported and corrected. The electrical sit down forklifts were not inspected on a daily basis to ensure no conditions adversely affect the safety of the vehicle.
Recent events (2)
- · I (O) $0
- · Z (O) $0
More inspections in this industry (NAICS 333911)
More inspections in WI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 344898663.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.