PROVIDENCE, RI —
OSHA Inspection: C.J. TREE, INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of C.J. TREE, INC. in 48 GRAND VIEW ST., PROVIDENCE, RI 02906 (NAICS 561730). OSHA activity number 344920350.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- C.J. TREE, INC.
- Site address
- 48 GRAND VIEW ST.
- City
- PROVIDENCE
- State
- RI
- ZIP
- 02906
- Mailing
- 226 DOUGLAS PIKE, SMITHFIELD, RI 02917
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 561730
- Employees
- 15
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.67 C02 V
- Issued
- Mar 5, 2021
- Penalty
- Initial $3,121 · Current $2,185 Reduced
General-duty citation text
29 CFR 1910.67(c)(2)(v):(v) A personal fall arrest or travel restraint system that meets the requirements in 29 CFR part 1910, subpart I, was not worn and attached to the boom or basket when working from an aerial lift: (a) At the worksite: On or about 9/10/2020, an employee in an Altec bucket truck, model LRV55, serial # 1006CV5610, was exposed to a fall hazard of approximately 10 feet, in that the employee had on a tree climber's belt and not a fall arrest harness while cutting tree limbs.
Recent events (2)
- — I (S) $2185
- — Z (S) $3121
1910.67 C03
- Issued
- Mar 5, 2021
- Abate by
- Mar 30, 2021
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.67(c)(3): Electrical tests had not been made in conformance with the requirements of ANSI A92.2-1969, Section 5: (a) At the worksite: On or about 9/10/2020, the employer used an Altec bucket truck, model # LRV 55, Serial # 1006CV5610, that did not have a periodic dielectric test accomplished before using it.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.132 A
- Issued
- Mar 5, 2021
- Penalty
- Initial $3,121 · Current $2,185 Reduced
General-duty citation text
29 CFR 1910.132(a): Protective equipment was not used when necessary whenever hazards capable of causing injury and impairment were encountered: (a) At the worksite: On or about 9/10/2020, the employer allowed employees to use a chainsaw without using chaps to prevent leg injuries.
Recent events (2)
- — I (S) $2185
- — Z (S) $3121
1910.135 A01
- Issued
- Mar 5, 2021
- Penalty
- Initial $5,461 · Current $0 Reduced
General-duty citation text
29 CFR 1910.135(a)(1): The employer did not ensure that each affected employee wear a protective helmet when working in areas where there is a potential for injury to the head from falling objects: (a) At the worksite: On or about 9/10/2020, an employee was not wearing a protective helmet while cutting tree limbs.
Recent events (2)
- — I (S) $0
- — Z (S) $5461
1910.180 D03
- Issued
- Mar 5, 2021
- Abate by
- Mar 30, 2021
- Penalty
- Initial $3,121 · Current $2,185 Reduced
General-duty citation text
29 CFR 1910.180(d)(3): Items listed in this section were not inspected for defects at intervals as defined in paragraph (d)(2)(i) of this section or as specifically indicated including observation during operation for any defects which might appear between regular inspections. (a) At the worksite: On or about 9/10/2020, the crane operator did not perform frequent inspections of the items listed in this section on the Kenworth truck crane, model # 1300, serial # 33332, VIN # 1NKDLB0X81J77637, on a daily or monthly basis.
Recent events (2)
- — I (S) $2185
- — Z (S) $3121
1910.180 D04
- Issued
- Mar 5, 2021
- Abate by
- Mar 30, 2021
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.180(d)(4): Complete inspection(s) of crane(s) were not performed at intervals as generally defined in 1910.180(d)(ii) with a determination made as to whether deficiencies constituted a safety hazard: (a) At the worksite: On or about 9/10/2020, the Kenworth truck crane, model # 1300, serial # 33332, VIN # 1NKDLB0X81J877637, was operated without having received an annual inspection since January 23, 2016.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at C.J. Tree, INC.
View C.J. Tree, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 561730)
More inspections in RI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344920350.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.