NORTH SMITHFIELD, RI —
OSHA Inspection: CUSTOM COATINGS, INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of CUSTOM COATINGS, INC. in 22 STEEL STREET, NORTH SMITHFIELD, RI 02896 (NAICS 339999). OSHA activity number 344936265.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CUSTOM COATINGS, INC.
- Site address
- 22 STEEL STREET
- City
- NORTH SMITHFIELD
- State
- RI
- ZIP
- 02896
- Mailing
- 22 STEEL STREET, NORTH SMITHFIELD, RI 02896
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 339999
- Employees
- 12
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.134 C02 II
- Issued
- Nov 20, 2020
- Abate by
- Jan 8, 2021
- Penalty
- Initial $1,966 · Current $1,966
General-duty citation text
29 CFR 1910.134(c)(2)(ii): The employer did not establish and implement those elements of a written program necessary to ensure that any employee using a respirator voluntarily was medically able to use that respirator, and that the respirator was cleaned, stored, and maintained so that its use does not present a health hazard to the user: (a) Worksite: On or about 9/21/2020, the employer did not ensure that employees utilizing tight-fitting half-mask elastomeric respirators voluntarily, were medically able to do so.
Recent events (2)
- — I (S) $1966
- — Z (S) $1966
1910.147 C04 II
- Issued
- Nov 20, 2020
- Abate by
- Jan 8, 2021
- Penalty
- Initial $3,277 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(ii): The energy control procedures did not clearly and specifically outline the scope, purpose, authorization, rules, and techniques to be utilized for the control of hazardous energy, including, but not limited to Items of this section: (a) Worksite: On or about 9/17/2020, the employer had not developed machine specific Lockout/Tag-out procedures for the Lamo-Line Machine.
Recent events (2)
- — I (S) $0
- — Z (S) $3277
1910.212 A01
- Issued
- Nov 20, 2020
- Penalty
- Initial $5,398 · Current $5,398
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: (a) Worksite: On or about 9/17/2020, the employer did not ensure that a machine guard remained in place on the Lamo-Line Machine to protect employees from ingoing nip points, where material is fed through two drive rollers.
Recent events (2)
- — I (S) $5398
- — Z (S) $5398
1910.132 D01
- Issued
- Nov 20, 2020
- Abate by
- Jan 8, 2021
- Penalty
- Initial $368 · Current $0 Reduced
General-duty citation text
29 CFR 1910.132(d)(1): The employer did not assess the workplace to determine if hazards are present, or are likely to be present, which necessitate the use of personal protective equipment (PPE): (a) Worksite: On or about 9/21/2020, the employer had not conducted a hazard assessment of employee work activities to determine the necessity, type and level of personal protective equipment needed to perform each task safely.
Recent events (2)
- — I (O) $0
- — Z (O) $368
1910.178 L04 III
- Issued
- Nov 20, 2020
- Abate by
- Jan 8, 2021
- Penalty
- Initial $368 · Current $0 Reduced
General-duty citation text
29 CFR 1910.178(l)(4)(iii): An evaluation of each powered industrial truck operator's performance was not being conducted at least once every three years: (a) Worksite: On or about 9/21/2020, the employer did not ensure that each forklift operator received a documented skills evaluation at least once every three years.
Recent events (2)
- — I (O) $0
- — Z (O) $368
More inspections at Custom Coatings, INC.
View Custom Coatings, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 339999)
More inspections in RI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344936265.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.