HARRINGTON, DE —
OSHA Inspection: BURRIS LOGISTICS
Federal Agency inspection · Safety discipline
At a glance
On , OSHA opened a federal Agency safety inspection of BURRIS LOGISTICS in 111 REESE AVENUE, HARRINGTON, DE 19952 (NAICS 424420). OSHA activity number 344939558.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- BURRIS LOGISTICS
- Site address
- 111 REESE AVENUE
- City
- HARRINGTON
- State
- DE
- ZIP
- 19952
- Mailing
- PO BOX219, MILFORD, DE 19963
What kind of inspection was it?
- Inspection type
- Federal Agency (M)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- A
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 424420
- Employees
- 129
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.22 A03
- Issued
- Mar 22, 2021
- Abate by
- Apr 15, 2021
- Penalty
- Initial $5,266 · Current $1,000 Reduced
General-duty citation text
29 CFR 1910.22(a)(3): Walking-working surfaces are maintained free of hazards such as sharp or protruding objects, loose boards, corrosion, leaks, spills, snow, and ice. a)111 Reece Avenue Harrington, DE - On or about September 23, 2020 ,the employer did not ensure that the stairs' metal vertical slats that are used to access the distribution area of the conveyors were not not properly maintained to prevent tripping and fall hazards.
Recent events (2)
- — I (O) $1000
- — Z (S) $5266
1910.147 C07 I
- Issued
- Mar 22, 2021
- Abate by
- Apr 15, 2021
- Penalty
- Initial $12,288 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(c)(7)(i): The employer did not provide training to ensure that the purpose and function of the energy control program are understood by employees and that the knowledge and skills required for the safe application, usage, and removal of the energy controls are acquired by employees: a) 111 Reece Avenue Harrington, DE - On or about September 23, 2020, an employee who routinely decluttered the boxes of food products upon the conveyor system identified as line #2 was not provided specific training in the energy control program by the employer as he instructed his employee to press an E-stop button to stop the conveyor and reposition the boxes on line #2 while adjacent line #4 was in operation and approximately 12 inches above the line # 2.
Recent events (2)
- — I (S) $0
- — Z (S) $12288
1910.212 A01
- Issued
- Mar 22, 2021
- Abate by
- Apr 15, 2021
- Penalty
- Initial $12,288 · Current $12,288
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a) 111 Reece Avenue Harrington, DE - On or about September 23, 2020, the employer failed to protect their employees from rotating parts [e.g. conveyor belt cylinders/rollers system] while attempting to remove a product jam on line # 2 approximately 12 inches from the underside of the above conveyor line [e.g. Line #4].
Recent events (2)
- — I (S) $12288
- — Z (S) $12288
1910.219 E01 I
- Issued
- Mar 22, 2021
- Abate by
- Apr 15, 2021
- Penalty
- Initial $12,288 · Current $0 Reduced
General-duty citation text
29 CFR 1910.219(e)(1)(i): Horizontal belts which had both runs 42 inches or less from the floor level were not fully enclosed by guards conforming to requirements specified in 29 CFR 1910.219(m) and (o): a)111 Reece Avenue Harrington, DE. - On or about September 23, 2020, an employee working from the underside of a conveyor belt system Line #4 attempting to correct packages which were entangled/stuck in a turn [e.g. S curve] along the rotating conveyor belt cylinders in this production area of the facility which had a horizontal belt that runs below 42 inches and were not fully enclosed or sufficiently guarded.
Recent events (2)
- — I (S) $0
- — Z (S) $12288
More inspections at Burris Logistics
View Burris Logistics's full OSHA safety record →
More inspections in this industry (NAICS 424420)
More inspections in DE
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344939558.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.