FRANKLIN, WI —
OSHA Inspection: GAIN INDUSTRIES, LLC
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of GAIN INDUSTRIES, LLC in 9720 S 54TH STREET, FRANKLIN, WI 53132 (NAICS 332710). OSHA activity number 344958525.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- GAIN INDUSTRIES, LLC
- Site address
- 9720 S 54TH STREET
- City
- FRANKLIN
- State
- WI
- ZIP
- 53132
- Mailing
- 9720 S 54TH STREET, FRANKLIN, WI 53132
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332710
- Employees
- 4
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.147 C07 I B
- Issued
- Jan 14, 2021
- Abate by
- Feb 10, 2021
- Penalty
- Initial $1,735 · Current $867 Reduced
General-duty citation text
29 CFR 1910.147(c)(7)(i)(B): Affected employees were not instructed in the purpose and use of the energy control procedure: (a) On or about October 6, 2020, at the worksite located at 9720 S. 54th Street, Franklin, WI, the employer did not ensure affected employees received training in the purpose and use of the energy control procedures, thereby exposing workers to struck-by and entanglement hazards.
Recent events (2)
- — I (S) $867
- — Z (S) $1735
1910.178 L04 III
- Issued
- Jan 14, 2021
- Abate by
- Feb 10, 2021
- Penalty
- Initial $1,735 · Current $1,735
General-duty citation text
29 CFR 1910.178(l)(4)(iii):An evaluation of each powered industrial truck operator's performance was not being conducted at least once every three years: (a) On or about October 6, 2020, at the worksite located at 9720 S. 54th Street, Franklin, WI, the employer did not perform an evaluation of each forklift operator's performance at least once every three years.
Recent events (2)
- — I (S) $1735
- — Z (S) $1735
1910.178 L05
- Issued
- Jan 14, 2021
- Abate by
- Feb 10, 2021
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(l)(5): The employer did not evaluate the competency of the operator who had previously received training appropriate to the truck and working conditions encountered. (a) On or about October 6, 2020, at the worksite located at 9720 S. 54th Street, Franklin, WI, the employer did not verify the competency of forklift operators who had previously received forklift training.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.212 A01
- Issued
- Jan 14, 2021
- Abate by
- Mar 4, 2021
- Penalty
- Initial $2,313 · Current $0 Reduced
General-duty citation text
29 CFR 1910.212(a)(1):One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: (a) On or about October 6, 2020, at the worksite located at 9720 S. 54th Street, Franklin, WI, the employer did not ensure effective guarding was implemented on a DMV-500 CNC machine. The door was not provided with a rigid means of keeping it closed during operation, thereby exposing workers to struck-by hazards.
Recent events (2)
- — I (S) $0
- — Z (S) $2313
1910.215 A02
- Issued
- Jan 14, 2021
- Abate by
- Mar 10, 2021
- Penalty
- Initial $2,313 · Current $1,500 Reduced
General-duty citation text
29 CFR 1910.215(a)(2):Abrasive wheel(s) used on grinding machinery were not provided with safety guard(s) which covered the spindle end, nut, flange projections: (a) On or about October 6, 2020, at the worksite located at 9720 S. 54th Street, Franklin, WI, the employer did not ensure the spindle end, nut and flange was guarded on (4) individual Dayton brand grinding machines used for polishing tasks, thereby exposing workers to entanglement hazards.
Recent events (2)
- — I (S) $1500
- — Z (S) $2313
More inspections in this industry (NAICS 332710)
More inspections in WI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344958525.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.