ROUNDUP, MT —
OSHA Inspection: GEBHARDT POST PLANT AND SAWMILL
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of GEBHARDT POST PLANT AND SAWMILL in 16855 HWY 12 WEST, ROUNDUP, MT 59072 (NAICS 321113). OSHA activity number 344963798.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- GEBHARDT POST PLANT AND SAWMILL
- Site address
- 16855 HWY 12 WEST
- City
- ROUNDUP
- State
- MT
- ZIP
- 59072
- Mailing
- 16855 HWY 12 WEST, ROUNDUP, MT 59072
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321113
- Employees
- 4
- Ownership type
- A
Citations
7 citations on file for this inspection.
1910.147 C04 I
- Issued
- Feb 2, 2021
- Abate by
- Mar 1, 2021
- Penalty
- Initial $2,487 · Current $1,243 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: a) Gebhardt Post Plant and Sawmill: On or about October 7, 2020 and at times prior, employees were exposed to the unexpected release of hazardous energy while performing: lubricating, guide adjustments, and other servicing and maintenance on equipment including, but not limited to the Resaw.
Recent events (2)
- — I (S) $1243
- — Z (S) $2487
1910.219 C02 I
- Issued
- Feb 2, 2021
- Abate by
- Mar 1, 2021
- Penalty
- Initial $1,492 · Current $746 Reduced
General-duty citation text
29 CFR 1910.219(c)(2)(i): All exposed part(s) of horizontal shafting seven (7) feet or less from floor or working platform were not protected by stationary casing(s) enclosing shafting completely or by trough(s) enclosing sides and top or sides and bottom of shafting: a) Gebhardt Post Plant and Sawmill: On or about October 7, 2020, and at times prior, employees were exposed to caught in hazards while working in and around the unguarded [2 and 3/16] inch keyed shaft powering the 45 inch diameter re-saw blade.
Recent events (2)
- — I (S) $746
- — Z (S) $1492
1910.219 D01
- Issued
- Feb 2, 2021
- Abate by
- Mar 1, 2021
- Penalty
- Initial $1,990 · Current $995 Reduced
General-duty citation text
29 CFR 1910.219(d)(1):Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o): a) Gebhardt Post Plant and Sawmill: On or about October 7, 2020, and at times prior, employees were exposed to caught in hazards while operating the re-saw near an unguarded 10 inch pulley that drives the feed rollers located 37 inches above the walking/working platform. b) Gebhardt Post Plant and Sawmill: On or about October 7, 2020, and at times prior, employees were exposed to caught in hazards while operating the re-saw near an unguarded 5 inch pulley on the DELCO electric motor located 37 inches above the walking/working platform.
Recent events (2)
- — I (S) $995
- — Z (S) $1990
1910.219 E01
- Issued
- Feb 2, 2021
- Abate by
- Mar 1, 2021
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(e)(1): Horizontal belts which had both runs 42 inches or less from the floor level were not fully enclosed by guards conforming to the requirements specified in 29 CFR1910.219 (m) and (o): a) Gebhardt Post Plant and Sawmill: On or about October 7, 2020 and at times prior employees were exposed to caught in hazards while operating the re-saw near an unguarded 3/4 inch wide horizontal belt run located 37 inches above the walking/working platform.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.219 F03
- Issued
- Feb 2, 2021
- Abate by
- Mar 1, 2021
- Penalty
- Initial $2,487 · Current $1,244 Reduced
General-duty citation text
29 CFR 1910.219(f)(3):Sprocket wheels and chains which were seven (7) feet or less above floors or platforms were not enclosed: a) Gebhardt Post Plant and Sawmill: On or about October 7, 2020 and at times prior employees were exposed to caught in hazards while operating the re-saw in close proximity to unguarded chains and sprockets used power the re-saw's feed rollers located 55 inches from the walking/working platform. b) Gebhardt Post Plant and Sawmill: On or about October 7, 2020 and at times prior employees were exposed to caught in hazards while operating the re-saw in close proximity to unguarded chains and sprockets used to power the re-saw's carry through chain located 39 inches from the walking/working platform.
Recent events (2)
- — I (S) $1243.5
- — Z (S) $2487
1910.265 E03 II E
- Issued
- Feb 2, 2021
- Abate by
- Mar 1, 2021
- Penalty
- Initial $2,487 · Current $1,244 Reduced
General-duty citation text
29 CFR 1910.265(e)(3)(ii)(e):Feed rolls did not contain a guard: a) Gebhardt Post Plant and Sawmill: On or about October 7, 2020 and at times prior employees were exposed to caught in hazards while operating the re-saw with unguarded feed rollers.
Recent events (2)
- — I (S) $1243.5
- — Z (S) $2487
1904.39 A02
- Issued
- Feb 2, 2021
- Abate by
- Mar 1, 2021
- Penalty
- Initial $2,487 · Current $0 Reduced
General-duty citation text
29 CFR 1904.39(a)(2):The employer did not report within 24-hours a work-related incident resulting in in-patient hospitalization, amputation or the loss of an eye: a) Gebhardt Post Plant and Sawmill: On October 1, 2020, the employer failed to report the hospitalization of one employee as a result of a work-related incident, within (24) twenty-four hours. An employee was hospitalized on October 1, 2020 and OSHA was notified by the employer on October 7, 2020.
Recent events (2)
- — I (O) $0
- — Z (O) $2487
More inspections at Gebhardt Post Plant and Sawmill
View Gebhardt Post Plant and Sawmill's full OSHA safety record →
More inspections in this industry (NAICS 321113)
More inspections in MT
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344963798.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.