TANNER, AL —
OSHA Inspection: CURITEVA, INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of CURITEVA, INC. in 25127 WILL MCCOMB DR., TANNER, AL 35671 (NAICS 339112). OSHA activity number 344966809.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CURITEVA, INC.
- Site address
- 25127 WILL MCCOMB DR.
- City
- TANNER
- State
- AL
- ZIP
- 35671
- Mailing
- 25127 WILL MCCOMB DR., TANNER, AL 35671
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 339112
- Employees
- 55
- Ownership type
- A
Citations
7 citations on file for this inspection.
1910.133 A01
- Issued
- Mar 24, 2021
- Abate by
- May 19, 2021
- Penalty
- Initial $5,461 · Current $5,461
General-duty citation text
29 CFR 1910.133(a)(1): The employer did not ensure that each affected employee uses appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation: (a) On or about 10/08/2020 - Chemical storage, machining, and finishing areas, employees were exposed to chemical hazards when the employer did not provide and require employees to use protective equipment such as, but not limited to, safety glasses, goggles, or face shield when dispensing or working with corrosive chemicals such as, but not limited to, EPS 4000 Electropolish, Total Cell Cleaner, Sulfuric acid 66 BE NSF, and Raytech Compound M. (b) On or about 10/08/2020 - Swiss machining area, employees were exposed to struck-by hazards when the employer did not provide and require employees to use protective equipment such as, but not limited to, safety glasses or face shield when operating the two Delta variable speed grinders with a Standard Abrasives surface conditioning or polishing and buffing wheel to remove burrs from spinal implant parts.
Recent events (2)
- — I (S) $5461
- — Z (S) $5461
1910.132 A
- Issued
- Mar 24, 2021
- Abate by
- May 19, 2021
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.132(a): Protective equipment, including personal protective equipment for eyes, face, head, and extremities, protective clothing, respiratory devices, and protective shields and barriers, were not provided, used, and maintained in a sanitary and reliable condition wherever it is necessary by reason of hazards of processes or environment, chemical hazards, radiological hazards, or mechanical irritants encountered in a manner capable of causing injury or impairment in the function of any part of the body through absorption, inhalation or physical contact: (a) On or about 10/08/2020 - Chemical storage, machining, and finishing areas, employees were exposed to chemical hazards when the employer did not provide and require employees to use protective equipment such as, but not limited to, protective clothing or rubber apron when dispensing or working with corrosive chemicals such as, but not limited to, EPS 4000 Electropolish, Total Cell Cleaner, Sulfuric acid 66 BE NSF, and Raytech Compound M.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.132 D01
- Issued
- Mar 24, 2021
- Abate by
- May 19, 2021
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.132(d)(1): The employer did not assess the workplace to determine if hazards are present, or are likely to be present, which necessitate the use of personal protective equipment (PPE): (a) On or about 10/08/2020 - Chemical storage, machining, and finishing areas, employees working with hazardous chemicals such as, but not limited to, EPS 4000 Electropolish, Total Cell Cleaner, Sulfuric acid 66 BE NSF, and Raytech Compound M were exposed to chemical hazards when the employer did not assess the workplace hazards for the use of safety glasses, goggles, a face shield, protective clothing and/or rubber apron. (b) On or about 10/08/2020 - Swiss machining area, employees operating the two Delta variable speed grinders with a Standard Abrasives surface conditioning or polishing and buffing wheel to remove burrs from spinal implant parts were exposed to struck-by hazards when the employer did not assess the workplace hazards for the use of safety glasses or a face shield.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.106 D02 III
- Issued
- Mar 24, 2021
- Abate by
- Apr 30, 2021
- Penalty
- Initial $5,461 · Current $1,000 Reduced
General-duty citation text
1910.106(d)(2)(iii): Flammable and combustible liquid containers were not in accordance with Table H-12: (a) On or about 10/08/2020 - Chemical Storage Area, Isopropyl Alcohol 70%, a Category 2 flammable liquid, was stored in a 55-gallon polyethylene drum.
Recent events (2)
- — I (S) $1000
- — Z (S) $5461
1910.38 B
- Issued
- Mar 24, 2021
- Abate by
- May 28, 2021
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.38(b): An emergency action plan was not in writing, kept in the workplace, and available to employees for review: (a) On or about 10/08/2020 - 25127 Will McComb Drive, Tanner, AL, employees were exposed to fire and weather hazards when a written emergency action plan had not been developed and implemented.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.305 G01 IV A
- Issued
- Mar 24, 2021
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(g)(1)(iv)(A): Flexible cords and/or cables were used as a substitute for the fixed wiring of a structure: (a) On or about 10/08/2020 - Finishing Area 2, employees were exposed to a fire hazards when a relocatable power tap was connected to the power drop from the ceiling to power a task light, two ultrasonic cleaners, and a centrifugal magnetic finisher.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.1200 E01
- Issued
- Mar 24, 2021
- Abate by
- May 28, 2021
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(e)(1):The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met: (a) On or about 10/08/2020 - 25127 Will McComb Drive, Tanner, AL, employees were exposed to fire and chemical burn hazards when a written hazard communication program had not been developed and implemented for employees working in and around chemicals including, but not limited to, EPS 4000 Electropolish, Total Cell Cleaner, Isopropyl Alcohol 70%, and Cimtech 320Z with InSol Technology.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections in this industry (NAICS 339112)
More inspections in AL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344966809.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.