TOTOWA, NJ —
OSHA Inspection: SAMNA CONSTRUCTION & STEEL FABRICATTION LLC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of SAMNA CONSTRUCTION & STEEL FABRICATTION LLC in 555 PREAKNESS AVE, TOTOWA, NJ 07512 (NAICS 332312). OSHA activity number 344972617.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SAMNA CONSTRUCTION & STEEL FABRICATTION LLC
- Site address
- 555 PREAKNESS AVE
- City
- TOTOWA
- State
- NJ
- ZIP
- 07512
- Mailing
- 75 DALE AVE, PATERSON, NJ 07501
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332312
- Employees
- 2
- Ownership type
- A
Citations
5 citations on file for this inspection.
1926.102 A01
- Issued
- Feb 9, 2021
- Penalty
- Initial $3,511 · Current $2,000 Reduced
General-duty citation text
29 CFR 1926.102(a)(1): The employer shall ensure that each affected employee uses appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation. a) Building Interior 4th floor: An employee was exposed to eye/face injuries while using a angle grinder without eye and face protection, on or about 10/6/20.
Recent events (3)
- — J (O) $2000
- — C (S) $3511
- — Z (S) $3511
1926.303 B01
- Issued
- Feb 9, 2021
- Penalty
- Initial $3,511 · Current $2,000 Reduced
General-duty citation text
29 CFR 1926.303(b)(1): Grinding machines were not equipped with safety guards in conformance with the requirements of ANSI B7.1-1970, Safety Code for the Use, Care, and Protection of abrasive wheels, and paragraph (d) of this section. a) Building Interior 4th Floor: An employee was exposed to face and eye injuries when the employee was using an angle grinder without the guard, on or about 10/6/20
Recent events (3)
- — J (O) $2000
- — C (S) $3511
- — Z (S) $3511
1926.453 B02 V
- Issued
- Feb 9, 2021
- Penalty
- Initial $4,096 · Current $2,000 Reduced
General-duty citation text
29 CFR 1926.453(b)(2)(v): A body belt with lanyard attached to the boom or basket was not worn by employee(s) working from an aerial lift: a) Exterior of Building Front : An employee was exposed to a 40 foot fall hazard, while operating an articulated boom platform without personal fall arrest system, on or about 10/6/20. b) Exterior of Building Back : An employee was exposed to a 60 foot fall hazard, while operating an articulated boom platform without personal fall arrest system, on or about 10/6/20.
Recent events (3)
- — J (O) $2000
- — C (S) $4096
- — Z (S) $4096
1926.501 B01
- Issued
- Feb 9, 2021
- Penalty
- Initial $4,096 · Current $2,000 Reduced
General-duty citation text
29 CFR 1926.501(b)(1):Each employee on a walking/working surface with an unprotected side or edge which was 6 feet (1.8 m) or more above a lower level was not protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems. a) Building Interior 4th floor Back side: An employee was exposed to a fall hazard of approximately 60 feet while working at the edge without the use of personal fall arrest system, guardrail system, safety net system, on or about 10/6/20 c) Building Interior 4th Floor front and left side: Employees were exposed to fall hazard of approximately 60 feet while working/walking on the 4th floor where section on the floor were without a guardrail system, safety net system or other means of fall protection, on or about 10/6/20. b) Building Interior 5th Floor: Employees were exposed to a fall hazard of approximately 10-12 feet while the mezzanine was not protected by guardrail system, safety net systems, or any other means of fall protection, on or about 10/6/20.
Recent events (3)
- — J (O) $2000
- — C (S) $4096
- — Z (S) $4096
1926.760 C01
- Issued
- Feb 9, 2021
- Penalty
- Initial $4,096 · Current $1,170 Reduced
General-duty citation text
29 CFR 1926.760(c)(1):Each employee working at the leading edge in a CDZ was not protected from fall hazards of more than two stories or 30 feet (9.1 m), whichever is less: a) Building Front 5th Floor: An employee was exposed to a fall hazard of approximately 40 feet while decking without the use of personal fall arrest system or other means of fall protection in place, on or about 10/6/20
Recent events (3)
- — J (O) $1170.37
- — C (S) $4096
- — Z (S) $4096
More inspections in this industry (NAICS 332312)
More inspections in NJ
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344972617.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.