WATERFORD, WI —
OSHA Inspection: QUILTER'S RULE INTERNATIONAL, LLC
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of QUILTER'S RULE INTERNATIONAL, LLC in 817 MOHR AVENUE, WATERFORD, WI 53185 (NAICS 451130). OSHA activity number 344976691.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- QUILTER'S RULE INTERNATIONAL, LLC
- Site address
- 817 MOHR AVENUE
- City
- WATERFORD
- State
- WI
- ZIP
- 53185
- Mailing
- 817 MOHR AVENUE, WATERFORD, WI 53185
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 451130
- Employees
- 7
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.178 Q01
- Issued
- Nov 19, 2020
- Abate by
- Dec 9, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(q)(1): Any power-operated industrial truck not in safe operating condition was not taken out of service, and/or repairs were not made by authorized personnel: (a) On October 14, 2020, the Allis Chalmers forklift was not removed from service after the employer was made aware that the brakes were not operating properly. This exposed employees to a struck-by hazard.
Recent events (1)
- — Z (S) $0
1910.219 F03
- Issued
- Nov 19, 2020
- Abate by
- Dec 9, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(f)(3): Sprocket wheels and chains which were seven (7) feet or less above floors or platforms were not enclosed: (a) On October 14, 2020, employees operating or working around the mat roller cart were exposed to caught-in hazards and amputation injury from an unguarded chain and sprocket.
Recent events (1)
- — Z (S) $0
1910.157 C01
- Issued
- Nov 19, 2020
- Abate by
- Nov 25, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.157(c)(1): Portable fire extinguishers were not mounted, located and identified so that they were readily accessible without subjecting the employees to injuries: (a) On or about October 14 , 2020, the fire extinguisher(s) at the laser cutting machine was not mounted to the wall or other suitable location.
Recent events (1)
- — Z (O) $0
1910.303 B02
- Issued
- Nov 19, 2020
- Abate by
- Dec 9, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.303(b)(2): Listed or labeled electrical equipment was not used or installed in accordance with instructions included in the listing or labeling: (a) On or About October 14, 2020, an outlet box, intended for fixed installation, was used on an extension cord to power a floor fan.
Recent events (1)
- — Z (O) $0
1910.303 G01 I A
- Issued
- Nov 19, 2020
- Abate by
- Dec 2, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.303(g)(1)(i)(A): For electric equipment operating at 600 volts, nominal, or less to ground, and likely to require examination, adjustment, servicing, or maintenance while energized, the depth of the working space in the direction of access to live parts (as measured from the live parts where they were exposed or from the enclosure front or opening where they were enclosed) was less than indicated in Table S-1 of Subpart S of Part 1910: (a) On or about October 14, 2020, the electrical panels in the shop area, on the west wall, were not kept clear (at least 3 feet in front of the panels) for ease of access.
Recent events (1)
- — Z (O) $0
1910.305 G01 I
- Issued
- Nov 19, 2020
- Abate by
- Dec 2, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(g)(1)(i): Flexible cords and cables were not approved for conditions of use and location: (a) On or about October 14, 2020, a flexible electrical cord used to power the printing machine, was on the ground in the walkway. This exposed the power cable to damage.
Recent events (1)
- — Z (O) $0
More inspections at Quilter'S Rule International, LLC
View Quilter'S Rule International, LLC's full OSHA safety record →
More inspections in this industry (NAICS 451130)
More inspections in WI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344976691.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.