OSHA Inspection: GRAMA CONSTRUCTION CORP.

Issued

Jun 14, 2021

Abate by

Jul 16, 2021

Penalty

Initial $329 · Current $329

General-duty citation text

29 CFR 1903.19(c)(1): The employer did not certify to OSHA, within 10 calendar days after the abatement date, that the cited violation had been abated:   Grama Construction Corp., failed to certify to OSHA within 10 calendar days after the abatement date that each of the following cited violations had been corrected:   Citation Number            Item Number                    Abatement Date  01                                01                                  02/18/2021 01                                 02                                  03/04/2021   In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF THE CORRECTIVE ACTION WORKSHEET).

Issued

Feb 5, 2021

Abate by

Feb 18, 2021

Penalty

Initial $4,096 · Current $4,096

General-duty citation text

29 CFR 1926.501(b)(1):  Each employee on a walking/working surface with an unprotected side or edge which was 6 feet (1.8 m) or more above a lower level was not protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems:  a)  On October 13, 2020, employees performing carpentry work were exposed to fall hazards from unprotected 2nd and 3rd floor decks.  In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.

Issued

Feb 5, 2021

Abate by

Mar 4, 2021

Penalty

Initial $2,926 · Current $2,926

General-duty citation text

29 CFR 1926.503(a)(1):  The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards:   a)  On or about October 13, 2020, employees were exposed to fall hazards while performing carpentry work and the employer did not provide a training program to recognize fall hazards and the procedures to be followed in order to minimize those hazards.  In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).