Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: JUAN CARLOS GONZALEZ

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of JUAN CARLOS GONZALEZ in 3523 CALICO DRIVE, IRVING, TX 75061 (NAICS 238140). OSHA activity number 344979034.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Juan Carlos Gonzalez — free Get an email when a new federal OSHA severe-injury report for Juan Carlos Gonzalez is published. One employer, no account, unsubscribe in one click.
Site address
3523 CALICO DRIVE
City
IRVING
State
TX
ZIP
75061
Mailing
10213 WATERVIEW PARKWAY, ROWLETT, TX 75089
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238140
Employees
4
Ownership type
A

5 citations on file for this inspection.

1926.100 A

Serious Gravity 5 1 instance 1 exposed
Issued
Jan 7, 2021
Abate by
Jan 20, 2021
Penalty
Initial $2,313 · Current $2,313
29 CFR 1926.100(a): Employees working in areas where there was a possible danger of head injury from impact, or falling or flying objects, or from electrical shock and burns, were not protected by protective helmets:  a) This violation occurred on or about October 16, 2020, at a workplace located at 3523 Calico Drive, Irving, TX; where employee, who was working under construction activities, was not protected from head injuries by wearing hard hat.
Recent events (1)
  • — Z (S) $2313

1926.451 E01

Serious Gravity 5 1 instance 4 exposed
Issued
Jan 7, 2021
Abate by
Jan 20, 2021
Penalty
Initial $2,892 · Current $2,892
29 CFR 1926.451(e)(1): When scaffold platforms were more than 2 feet (0.6 m) above or below a point of access, portable ladders, hook-on ladders, attachable ladders, stair towers (scaffold stairways/towers), stairway-type ladders (such as ladder stands), ramps, walkways, integral prefabricated scaffold access, or direct access from other scaffold, structure, personnel hoist, or similar surface was not used:  a) This violation occurred on or about October 16, 2020, at a workplace located at 3523 Calico Drive, Irving, TX; where employees, who were working from a scaffold system, climbed the frame to access the work platform.
Recent events (1)
  • — Z (S) $2892

1926.452 C02

Serious Gravity 5 1 instance 4 exposed
Issued
Jan 7, 2021
Abate by
Jan 20, 2021
Penalty
Initial $0 · Current $0
29 CFR 1926.452(c)(2): Frames and panels were not braced by cross, horizontal, or diagonal braces, or combination thereof, which would secure vertical members together laterally:  a) This violation occurred on or about October 16, 2020, at a workplace located at 3523 Calico Drive, Irving, TX;  where employees, who were working from a two-tier scaffold system that was missing cross bracing.
Recent events (1)
  • — Z (S) $0

1926.451 G01

Serious Gravity 10 1 instance 4 exposed
Issued
Jan 7, 2021
Abate by
Jan 20, 2021
Penalty
Initial $4,048 · Current $4,048
29 CFR 1926.451(g)(1): Employees on scaffolds more than 10 feet (3.1 m) above a lower level were not protected from falling to that lower level by fall protection established in paragraphs (g)(1)(i)-(vii) of this section:  a) This violation occurred on or about October 16, 2020, at a workplace located at 3523 Calico Drive, Irving, TX;  where employees, who were working from the second tier scaffold system, were not protected from falling to the ground below.
Recent events (1)
  • — Z (S) $4048

1926.451 G04 I

Serious Gravity 10 1 instance 4 exposed
Issued
Jan 7, 2021
Abate by
Jan 20, 2021
Penalty
Initial $0 · Current $0
29 CFR 1926.451(g)(4)(i): Guardrail systems were not installed along all open sides and ends of platforms:  a) This violation occurred on or about October 16, 2020,  at a workplace located at 3523 Calico Drive, Irivng, TX; where employees, who were working from the second tier scaffold system, were not protected from falling to the ground below.
Recent events (1)
  • — Z (S) $0

View Juan Carlos Gonzalez's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344979034.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.