CHARM, OH —
OSHA Inspection: KEIM LUMBER COMPANY
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of KEIM LUMBER COMPANY in 4465 STATE ROUTE 557, CHARM, OH 44617 (NAICS 423310). OSHA activity number 344979075.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- KEIM LUMBER COMPANY
- Site address
- 4465 STATE ROUTE 557
- City
- CHARM
- State
- OH
- ZIP
- 44617
- Mailing
- 4465 STATE ROUTE 557, CHARM, OH 44617
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 423310
- Employees
- 535
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.213 C01
- Issued
- Jan 13, 2021
- Penalty
- Initial $13,494 · Current $11,927 Reduced
General-duty citation text
29 CFR 1910.213(c)(1): Circular handfed ripsaw(s) were not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut or an equally adequate guard: a. On or about October 8, 2020, located in the PreHung Department, employees were operating an inadequately guarded Altendorf F45 handfed sliding table saw to rip narrow pieces of wood material. The guard on the saw was not adjusted to completely enclose the portion of the saw above the material being cut, thereby exposing employees to struck-by hazards.
Recent events (3)
- — J (O) $11927
- — C (S) $13494
- — Z (S) $13494
1910.213 S09
- Issued
- Jan 13, 2021
- Penalty
- Initial $9,639 · Current $0 Reduced
General-duty citation text
29 CFR 1910.213(s)(9): Suitable sizes and types of push sticks or push blocks were not provided at the work place: a. On or about October 8, 2020, located in the PreHung door department, the employer did not enforce the use of push sticks for employees operating an Altendorf F45 sliding table saw to rip a narrow piece of wood (doorjamb piece) exposing employees to struck-by hazards.
Recent events (3)
- — J (S) $0
- — C (S) $9639
- — Z (S) $9639
1910.1030 C01 I
- Issued
- Jan 13, 2021
- Abate by
- Feb 15, 2022
- Penalty
- Initial $9,639 · Current $8,073 Reduced
General-duty citation text
29 CFR 1910.1030(c)(1)(i):The employer having employee(s) with occupational exposure did not establish a written Exposure Control Plan designed to eliminate or minimize employee exposure: a. On or about October 8, 2020 and at times prior, the employer had employees with occupational exposure such as, but not limited, employees that were designated first aid responders as well as those who were designated to perform clean up following accidents, and had not established a written Exposure Control Plan.
Recent events (3)
- — J (O) $8073
- — C (S) $9639
- — Z (S) $9639
1910.1030 D03 II
- Issued
- Jan 13, 2021
- Abate by
- Feb 15, 2022
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1030(d)(3)(ii): The employer did not ensure that the employee used appropriate personal protective equipment when there was occupational exposure: a. On or about October 8, 2020, located in the PreHung Door Department, an employee did not use appropriate PPE in the form of nitrile gloves or other suitable means when cleaning up blood spatter on the Altendorf sliding table saw following an accident.
Recent events (3)
- — J (O) $0
- — C (S) $0
- — Z (S) $0
1910.1030 F01 I
- Issued
- Jan 13, 2021
- Abate by
- Feb 15, 2022
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1030(f)(1)(i):The employer did not make available the hepatitis B vaccine and vaccination series to all employees who have occupational exposure: a. On or about October 8, 2020, and at times prior, the employer had employees with occupational exposure who were not offered the hepatitis B vaccine and vaccination series, thereby exposing employees to potential contraction of Hepatitis B.
Recent events (3)
- — J (O) $0
- — C (S) $0
- — Z (S) $0
1910.1030 G02 I
- Issued
- Jan 13, 2021
- Abate by
- Feb 15, 2022
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1030(g)(2)(i): The employer shall train each employee with occupational exposure in accordance with the requirements of this section. Such training must be provided at no cost to the employee and during working hours. The employer shall institute a training program and ensure employee participation in the program. a. On or about October 8, 2020, an employee who had potential occupational exposure to bloodborne pathogens had not received bloodborne pathogen training.
Recent events (3)
- — J (O) $0
- — C (S) $0
- — Z (S) $0
More inspections at Keim Lumber Company
View Keim Lumber Company's full OSHA safety record →
More inspections in this industry (NAICS 423310)
More inspections in OH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344979075.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.