WASHINGTON, DC —
OSHA Inspection: CLARK, SMOOT, CONSIGLI, A JOINT VENTURE
Unprogrammed Related inspection · Safety discipline
At a glance
On , OSHA opened an unprogrammed Related safety inspection of CLARK, SMOOT, CONSIGLI, A JOINT VENTURE in 600 INDEPENDENCE AVENUE, SW, WASHINGTON, DC 20560 (NAICS 236220). OSHA activity number 344995147.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CLARK, SMOOT, CONSIGLI, A JOINT VENTURE
- Site address
- 600 INDEPENDENCE AVENUE, SW
- City
- WASHINGTON
- State
- DC
- ZIP
- 20560
- Mailing
- 7500 OLD GEORGETOWN ROAD, BETHESDA, MD 20814
What kind of inspection was it?
- Inspection type
- Unprogrammed Related (G)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 236220
- Employees
- 48
- Ownership type
- A
Citations
5 citations on file for this inspection.
1926.20 B02
- Issued
- Mar 24, 2021
- Penalty
- Initial $13,653 · Current $0 Reduced
General-duty citation text
29 CFR 1926.20(b)(2):The employer did not initiate and maintain programs which provided for frequent and regular inspections of the job site, materials and equipment to be made by a competent person(s): a) Gallery 102 - While on the second floor, employees entered and were removing material from an Electro-Elsa material hoist, model number M20S, serial number 880711, where the loading dock door was not secure in that it was missing a door slide latch, and had a broken or missing door guide, exposing employees to a fall hazard of 28 feet and 11 inches, on or about 09/28/2020. NO ABATEMENT DOCUMENTATION REQUIRED
Recent events (2)
- — I (S) $0
- — Z (S) $13653
1926.200 B01
- Issued
- Mar 24, 2021
- Penalty
- Initial $0 · Current $13,653
General-duty citation text
29 CFR 1926.200(b)(1): A danger sign was not used where an immediate hazard exists: a) Gallery 102 - While on the second floor, employees entered and were removing material from an Electro-Elsa material hoist, model number M20S, serial number 880711, where the loading dock door was not secure in that it was missing a door slide latch, and had a broken or missing door guide, exposing employees to a fall hazard of 28 feet and 11 inches, and a danger sign was not posted on or about 09/28/2020. ABATEMENT DOCUMENTATION NOT REQUIRED
Recent events (2)
- — I (O) $13653
- — Z (S) $0
1926.200 H01
- Issued
- Mar 24, 2021
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.200(h)(1): Accident prevention tags were not used a temporary means of warning employees of an existing hazard, such as defective tools, equipment, etc. a) Gallery 102 - While on the second floor, employees entered and were removing material from an Electro-Elsa material hoist, model number M20S, serial number 880711, that was not tagged as defective or out of service, where the loading dock door was not secure in that it was missing a door slide latch, and had a broken or missing door guide, exposing employees to a fall hazard of 28 feet and 11 inches, on or about 09/28/2020. Or In the Alternative: 29 CFR 1926.20(b)(3): Machinery, tool(s), material(s), or equipment which was not in compliance with the applicable requirement(s) of 29 CFR 1926 was not prohibited, and/or was not either identified as unsafe by tagging, or locking the controls to render them inoperable, or physically removed from its place of operation. a) Gallery 102 - While on the second floor, employees entered and were removing material from an Electro-Elsa material hoist, model number M20S, serial number 880711, that was not tagged as defective or out of service, where the loading dock door was not secure in that it was missing a door slide latch, and had a broken or missing door guide, exposing employees to a fall hazard of 28 feet and 11 inches, on or about 09/28/2020. ABATEMENT DOCUMENTATION NOT REQUIRED
Recent events (2)
- — I (O) $0
- — Z (S) $0
1926.552 B01 I
- Issued
- Mar 24, 2021
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.552(b)(1)(i):Operating rules were not established and posted at the operator's station of the material hoist: a) Gallery 102 - Operating rules were not posted at the operator's station of an Electro-Elsa material hoist, model number M20S, serial number 880711, used by employees to move drywall and insulation on or about September 28, 2020. ABATEMENT DOCUMENTATION NOT REQUIRED
Recent events (2)
- — I (O) $0
- — Z (O) $0
1926.552 B04
- Issued
- Mar 24, 2021
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.552(b)(4):The operator's station of a hoisting machine was not provided with overhead protection equivalent to tight planking at least 2 inches thick, with supports of equal strength: a) Gallery 102 - The operator's station for the Electro-Elsa material hoist, model #M20S, serial number 880711, used by employees to move drywall and insulation, had a three quarter inch piece of plywood for overhead protection, on or about 09/28/2020. ABATEMENT DOCUMENTATION NOT REQUIRED
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections in this industry (NAICS 236220)
More inspections in DC
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344995147.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.