JACKSONVILLE, FL —
OSHA Inspection: WEBSTER'S CUSTOM CABINETS, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of WEBSTER'S CUSTOM CABINETS, INC. in 6023 BARTHOLF AVENUE, JACKSONVILLE, FL 32210 (NAICS 337110). OSHA activity number 345006019.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- WEBSTER'S CUSTOM CABINETS, INC.
- Site address
- 6023 BARTHOLF AVENUE
- City
- JACKSONVILLE
- State
- FL
- ZIP
- 32210
- Mailing
- 6023 BARTHOLF AVENUE, JACKSONVILLE, FL 32210
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 337110
- Employees
- 10
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.107 C07
- Issued
- Feb 5, 2021
- Abate by
- Mar 11, 2021
- Penalty
- Initial $2,487 · Current $1,492 Reduced
General-duty citation text
29 CFR 1910.107(c)(7):Electric lamps outside of but within 20 feet of spraying area(s), and not separated therefrom by partition(s), were not protected from mechanical injury by suitable guards or by location: a. On October 30, 2020, in the shop, the fluorescent light above the area used to spray contact cement was within 14 feet, exposing employees to a fire hazard.
Recent events (2)
- — I (S) $1492.2
- — Z (S) $2487
1910.133 A01
- Issued
- Feb 5, 2021
- Abate by
- Feb 18, 2021
- Penalty
- Initial $2,984 · Current $1,790 Reduced
General-duty citation text
29 CFR 1910.133(a)(1):Protective eye equipment was not required where there was a reasonable probability of injury that could be prevented by such equipment: a. On October 30, 2020, in the shop, employees using saws to cut laminate and wood were not wearing safety glasses, exposing themselves to the hazard of getting wood dust in the eye.
Recent events (2)
- — I (S) $1790.4
- — Z (S) $2984
1910.213 C01
- Issued
- Feb 5, 2021
- Abate by
- Feb 18, 2021
- Penalty
- Initial $2,984 · Current $1,790 Reduced
General-duty citation text
29 CFR 1910.213(c)(1):Circular handfed ripsaw(s) were not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut: a. On October 30, 2020, in the shop, the Delta table saw used to cut laminate did not have a hood guard, exposing employees to the hazard of being cut by the 10- inch blade. b. On October 30, 2020, in the shop, the Craftsman table saw used to cut wood did not have a hood guard, exposing employees to the hazard of being cut by the 8- inch blade.
Recent events (2)
- — I (S) $1790.4
- — Z (S) $2984
1910.213 H01
- Issued
- Feb 5, 2021
- Abate by
- Feb 18, 2021
- Penalty
- Initial $1,990 · Current $1,194 Reduced
General-duty citation text
29 CFR 1910.213(h)(1):The sides of the lower exposed portion of the blade of radial saw(s) were not guarded to the full diameter of the blade by a device that automatically adjusted itself to the thickness of the stock: a. On October 30, 2020, in the shop, the Craftsman radial arm saw did not have an adjustable guard on the lower half of the blade, exposing employees to the hazard of being cut by the 10- inch blade.
Recent events (2)
- — I (S) $1194
- — Z (S) $1990
1910.213 H04
- Issued
- Feb 5, 2021
- Abate by
- Feb 18, 2021
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(h)(4):Radial saw(s) were not installed in a manner so as to cause the cutting head to return gently to the starting position when released by the operator: a. On October 30, 2020, in the shop, the Craftsman radial arm saw did not return to the starting position when released by the operator.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.303 B01 II
- Issued
- Feb 5, 2021
- Abate by
- Feb 18, 2021
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.303(b)(1)(ii): Electrical equipment was not free from recognized hazards, based on the mechanical strength and durability, including, for parts designed to enclose and protect other equipment, the adequacy of the protection thus provided: a. On October 30, 2020, in the shop, the employer had created and allowed employees to use, four (4) job-made extension cords that hung freely from the overhead and were constructed with receptacle boxing that was intended for use as a permanent installation, exposing employees to electrical shock hazards.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Webster'S Custom Cabinets, INC.
View Webster'S Custom Cabinets, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 337110)
More inspections in FL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345006019.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.