OSHA Inspection: C&E CONTAINERS, INC

Issued

2021-02-17 00:00:00

Abate by

2021-03-15 00:00:00

Penalty

Initial $9557.00 · Current $9557.00

General-duty citation text

29 CFR  1910.212(a)(1):One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:  a) Production area: Employees were exposed to the unguarded ingoing nip point of the laminate rollers on the 558 Pad Gluer laminating machine during servicing, on or about November 4, 2020.  ABATEMENT CERTIFICATION AND DOCUMENTATION REQUIRED

Issued

2021-02-17 00:00:00

Abate by

2021-03-15 00:00:00

Penalty

Initial $5461.00 · Current $5461.00

General-duty citation text

29 CFR  1910.219(f)(3):Sprocket wheels and chains which were seven (7) feet or less above floors or platforms were not enclosed:  a) Production area: The roller drive chain and sprocket on the 558 Pad Gluer laminating machine was not fully enclosed, as observed on or about November 5, 2020.  ABATEMENT CERTIFICATION REQUIRED

Issued

2021-02-17 00:00:00

Abate by

2021-04-02 00:00:00

Penalty

Initial $9557.00 · Current $9557.00

General-duty citation text

29 CFR  1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section:   a) Production area:  Procedures were not developed or utilized for the control of potentially hazardous energy when employees were exposed to the unguarded ingoing nip point of the laminate rollers on the 558 Pad Gluer laminating machine during servicing, on or about November 4, 2020.  ABATEMENT CERTIFICATION AND DOCUMENTATION REQUIRED

Issued

2021-02-17 00:00:00

Abate by

2021-04-02 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR  1910.147(c)(7)(i): The employer did not provide adequate training to ensure that employees acquired the knowledge and skills required for the safe application, usage and removal of energy control devices:   a) Production area:  The employer did not provide adequate training to ensure employees acquired the knowledge and skills required for the safe application and use of energy control devices when employees were exposed to the unguarded ingoing nip point of the laminate rollers on the 558 Pad Gluer laminating machine during maintenance or servicing of the equipment, on or about November 4, 2020.  ABATEMENT CERTIFICATION REQUIRED