OSHA Inspection: MIKE SMITH DBA QUALITY ROOFING & TUCKPOINTING INC.

Issued

Mar 8, 2022

Abate by

Mar 31, 2022

Penalty

Initial $349 · Current $349

General-duty citation text

29 CFR 1903.19(c)(1): The employer did not certify to OSHA, within 10 calendar days after the abatement date, that the cited violation had been abated:  Mike Smith dba Quality Roofing & Tuckpointing Inc., failed to certify to OSHA within 10 calendar days after the abatement date that each of the following cited violations had been corrected:  Citation Number                Item Number                        Abatement Date      01                                    01    a                                   04/15/2021      01                                    01    b                                   04/15/2021      02                                    01                                          04/29/2021       In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).

Issued

Apr 5, 2021

Abate by

Apr 15, 2021

Penalty

Initial $4,096 · Current $4,096

General-duty citation text

29 CFR 1926.501(b)(1):  Each employee on a walking/working surface with an unprotected side or edge which was 6 feet (1.8 m) or more above a lower level was not protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems:  a)  On November 16, 2020, employees performing masonry work were exposed to fall hazards from the roof of a four story building.  In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.

Issued

Apr 5, 2021

Abate by

Apr 15, 2021

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1926.501(b)(4)(i):  Each employee on walking/working surfaces was not protected from falling through holes (including skylights), more than six feet (1.8 m) above lower levels, by personal fall arrest systems, covers, or guardrail systems erected around such holes:  a)  On November 16, 2020, employees were exposed to fall hazards while working around unprotected skylights.  In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.

Issued

Apr 5, 2021

Abate by

Apr 29, 2021

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1926.503(b)(1):  The employer did not verify compliance with paragraph (a) of this section by preparing a written (training) certification record including the name or other identity of the employee trained, the date(s) of the training, and the signature of the person who conducted the training or the signature of the employer:  a)  On or about November 16, 2020, the employer did not maintain records or certification of fall protection training for employees exposed to fall hazards.  In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).