Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,198,201Inspections Most recent open 2026-08-31 Last loaded 2026-09-03

OSHA Inspection: SCHULLERS CONTRACTING AND HOME REMODELING

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of SCHULLERS CONTRACTING AND HOME REMODELING in 180 NEW ST., GLENSIDE, PA 19038 (NAICS 238140). OSHA activity number 345033518.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Schullers Contracting and Home Remodeling for free Get an email when a new federal OSHA severe-injury report for Schullers Contracting and Home Remodeling is published. One employer, no account, unsubscribe in one click.
Site address
180 NEW ST.
City
GLENSIDE
State
PA
ZIP
19038
Mailing
6364 KINGSESSING AVE, PHILADELPHIA, PA 19142
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
Non-union (B)
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238140
Employees
3
Ownership type
Private (A)

3 citations on file for this inspection.

1926.451 B01 I

Serious Gravity 5 1 instance 1 exposed
Issued
Apr 28, 2021
Abate by
May 10, 2021
Penalty
Initial $2,341 · Current $3,000
29 CFR  1926.451(b)(1)(i): Each platform unit (e.g., scaffold plank, fabricated plank, fabricated deck, or fabricated platform) was not installed so that the space between adjacent units and the space between the platform and the uprights were no more than 1 inch (2.5 cm) wide, except where the employer can demonstrate that a wider space is necessary.   (a) 180 New St. Glenside, PA.: On or about November 18, 2020, employees were performing residential roofing and siding work from the top of a two section-high scaffold that was not fully planked. Employees are exposed to fall hazards of over 10 feet to the ground.
Recent events (2)
  • · I (S) $3000
  • · Z (S) $2341

1926.451 G01

Serious Gravity 5 1 instance 1 exposed
Issued
Apr 28, 2021
Abate by
May 10, 2021
Penalty
Initial $0 · Current $0
29 CFR  1926.451(g)(1):Employees on scaffolds more than 10 feet (3.1 m) above a lower level were not protected from falling to that lower level by fall protection established in paragraphs (g)(1)(i)-(vii) of this section:  (a) 180 New St. Glenside, PA.: On or about November 18, 2020, employees were performing residential roofing and siding work from a two deck-high scaffold work platform, which did not have fall protection in place, exposing employees to 12 foot fall hazard.
Recent events (2)
  • · I (S) $0
  • · Z (S) $0

1926.1053 B04

Serious Gravity 5 1 instance 2 exposed
Issued
Apr 28, 2021
Abate by
May 10, 2021
Penalty
Initial $2,341 · Current $0 Reduced
29 CFR  1926.1053(b)(4):Ladders were used for purposes other than the purposes for which they were designed:  (a) 180 New St. Glenside, PA.: On or about November 18, 2020, employees misused an A-frame ladder as a bridge between a scaffold and roof top, exposing e approximately 12 feet fall hazard.
Recent events (2)
  • · I (S) $0
  • · Z (S) $2341

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 345033518.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.