OSHA Inspection: JERRY TURNBAUGH

Issued

Feb 4, 2021

Abate by

Mar 11, 2021

Penalty

Initial $30,037 · Current $30,037

General-duty citation text

29 CFR 1926.20(b)(1): It shall be the responsibility of the employer to initiate and maintain such programs as may be necessary to comply with this part.  The employer will not develop and maintain safety and health programs for employees, such as a fall protection program for framing construction work activities.  This most recently occurred on December 11, 2020, at the 841 Villagemill Road, Pickerington, Ohio jobsite. The employer failed to develop and implement a safety and health program for employees performing framing work onsite.  Jerry Turnbaugh was previously cited for a violation of this Occupational Safety and Health standard 29 CFR 1926.20(b)(1) which was contained in inspection numbers:  1) 1487111, Citation 1-Item 1, Issued on 09/10/2020 2) 1474442, Citation 1-Item 1, Issued on 07/8/2020 3) 1384927, Citation 2-Item 1, Issued on 04/8/2019 4) 1301052, Citation 1-Item 1, Issued on 03/29/2018  Pursuant to 29 CFR 1903.19, the employer must submit documents describing the steps it is taking to ensure compliance, including a description of how these steps protect its employees from the fall hazards associated with framing construction work activities.

Issued

Feb 4, 2021

Abate by

Mar 11, 2021

Penalty

Initial $30,037 · Current $30,037

General-duty citation text

29 CFR 1926.21(b)(2): The employer shall instruct each employee in the recognition and avoidance of unsafe conditions and the regulations applicable to his work environment to control or eliminate any hazards or other exposure to illness or injury.  The employer will not provide safety and health training for employees.  This most recently occurred on December 11, 2020, at the 841 Villagemill Road, Pickerington, Ohio jobsite. The employer failed to provide safety and health training for employees performing framing work onsite, including, but not limited to, fall protection training and ladder safety training.  Jerry Turnbaugh was previously cited for a violation of this Occupational Safety and Health standard 29 CFR 1926.21(b)(2) which was contained in inspection numbers:  1) 1487111, Citation 1-Item 2a, Issued on 09/10/2020 2) 1474442, Citation 1-Item 2, Issued on 07/08/2020 3) 1384927, Citation 2-Item 2a, Issued on 04/08/2019 4) 1301052, Citation 1-Item 2a, Issued on 03/29/2018  Pursuant to 29 CFR 1903.19, the employer must submit documents describing the steps it is taking to ensure compliance, including a description of how these steps protect its employees from the fall hazards associated with framing construction work activities.

Issued

Feb 4, 2021

Abate by

Mar 11, 2021

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1926.503(a)(1): The employer shall provide a training program for each employee who might be exposed to fall hazards. The program shall enable each employee to recognize the hazards of falling and shall train each employee in the procedures to be followed in order to minimize these hazards.  The employer will not provide a fall hazard training program for employees.  This most recently occurred on December 11, 2020, at the 841 Villagemill Road, Pickerington, Ohio jobsite. The employer failed to develop and implement a fall hazard training program for employees with exposure to fall hazards while performing framing work onsite.  Jerry Turnbaugh was previously cited for a violation of this Occupational Safety and Health standard 29 CFR 1926.503(a)(1) which was contained in inspection numbers:  1) 1487111, Citation 1-Item 2b, Issued on 09/10/2020 2) 1384927, Citation 2-Item 2b, Issued on 04/08/20219 3) 1301052, Citation 1-Item 4, Issued on 03/29/2018  Pursuant to 29 CFR 1903.19, the employer must submit documents describing the steps it is taking to ensure compliance, including a description of how these steps protect its employees from the fall hazards associated with framing construction work activities.

Issued

Feb 4, 2021

Abate by

Mar 11, 2021

Penalty

Initial $30,037 · Current $30,037

General-duty citation text

29 CFR 1926.501(b)(13): "Residential construction." Each employee engaged in residential construction activities 6 feet (1.8 m) or more above lower levels shall be protected by guardrail systems, safety net system, or personal fall arrest system unless another provision in paragraph (b) of this section provides for an alternative fall protection measure. Exception: When the employer can demonstrate that it is infeasible or creates a greater hazard to use these systems, the employer shall develop and implement a fall protection plan which meets the requirements of paragraph (k) of 1926.502. Note: There is a presumption that it is feasible and will not create a greater hazard to implement at least one of the above-listed fall protection systems. Accordingly, the employer has the burden of establishing that it is appropriate to implement a fall protection plan which complies with 1926.502(k) for a particular workplace situation, in lieu of implementing any of those systems.  The employer does not protect each employee from the hazard of falling by the use of fall protection systems.  This most recently occurred on December 11, 2020, at the 841 Villagemill Road, Pickerington, Ohio jobsite. The employer failed to ensure employees were protected from falls while performing framing work from the roof, thereby exposing employees to fall hazards in excess of 20 feet.    Jerry Turnbaugh was previously cited for a violation of this Occupational Safety and Health standard 29 CFR 1926.501(b)(13) which was contained in inspection number:  1) 1487111, Citation 1-Item 4, Issued on 09/10/2020 2) 1480136, Citation 1-Item 1, Issued on 07/08/2020 3) 1477358, Citation 1-Item 1, Issued on 07/08/2020 4) 1474442, Citation 1-Item 3, Issued on 07/08/2020 5) 1384927, Citation 1-Item 1, Issued on 04/08/2019 6) 1301052, Citation 1-Item 4, Issued on 03/29/2018 7) 904156, Citation 1-Item 1, Issued on 06/19/2013  Pursuant to 29 CFR 1903.19, the employer must submit documents describing the steps it is taking to ensure compliance, including a description of how these steps protect its employees from the fall hazards associated with framing construction work activities.