ELK GROVE VILLAGE, IL —
OSHA Inspection: MAUSER PACKAGING SOLUTIONS
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of MAUSER PACKAGING SOLUTIONS in 1350 ARTHUR AVENUE, ELK GROVE VILLAGE, IL 60007 (NAICS 561910). OSHA activity number 345062756.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MAUSER PACKAGING SOLUTIONS
- Site address
- 1350 ARTHUR AVENUE
- City
- ELK GROVE VILLAGE
- State
- IL
- ZIP
- 60007
- Mailing
- 1350 ARTHUR AVENUE, ELK GROVE VILLAGE, IL 60007
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 561910
- Employees
- 205
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.333 A
- Issued
- Apr 19, 2021
- Abate by
- May 13, 2021
- Penalty
- Initial $13,653 · Current $0 Reduced
General-duty citation text
29 CFR 1910.333(a): Safety-related work practices were not employed to prevent electric shock or other injuries resulting from either direct or indirect electrical contacts, when work was performed near or on equipment or circuits which were or could be energized: a) South Side Main Switch Board #5 Service Panel - On December 10, 2020, the employer did not ensure that employee(s) used safety-related work practices to prevent electric burns, electrical shock or other injuries resulting from either direct or indirect electrical contacts, when performing electrical work such changing a fuse on a 480 electrical service panel.
Recent events (2)
- — I (S) $0
- — Z (S) $13653
1910.333 B02
- Issued
- Apr 19, 2021
- Abate by
- May 13, 2021
- Penalty
- Initial $0 · Current $13,653
General-duty citation text
29 CFR 1910.333(b)(2): While an employee was exposed to contact with parts of fixed electric equipment or circuits which were de-energized, the circuits energizing the parts were not locked out or tagged or both in accordance with the requirements of this paragraph (b) of 29 CFR 1910.333(b)(2). a) South Side Main Switch Board #5 Service Panel - On December 10, 2020, the employer did not ensure that employee(s) exposed to contact with parts of fixed electric equipment or circuits which were de-energized, such as when changing a fuse on a 480 electrical panel, that the circuits energizing the parts were locked out or tagged or both in accordance with the requirements of this paragraph (b) of 29 CFR 1910.333(b)(2).
Recent events (2)
- — I (S) $13653
- — Z (S) $0
1910.335 A01 I
- Issued
- Apr 19, 2021
- Abate by
- May 13, 2021
- Penalty
- Initial $13,653 · Current $0 Reduced
General-duty citation text
29 CFR 1910.335(a)(1)(i): Employees working in areas where there were potential electrical hazards were not using electrical protective equipment that was appropriate for the specific parts of the body to be protected and for the work to be performed: a) South Side Main Switch Board #5 Service Panel - On December 10, 2020, the employer did not ensure that an employee working on changing a fuse on a 480 electrical panel was using the appropriate personal protective equipment for the specific parts of the body to be protected and for the work to be performed.
Recent events (2)
- — I (S) $0
- — Z (S) $13653
1910.335 A02 I
- Issued
- Apr 19, 2021
- Abate by
- May 13, 2021
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.335(a)(2)(i): Employees did not use insulated tools or handling equipment that might make contact with such conductors or parts when working near exposed energized conductors or circuit parts. a) South Side Main Switch Board #5 Service Panel - On December 10, 2020, the employer did not ensure that employee(s) used insulated tools or handling equipment that might make contact with such conductors or parts when conducting electrical work such as changing a fuse on a 480 electrical service panel.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at Mauser Packaging Solutions
View Mauser Packaging Solutions's full OSHA safety record →
More inspections in this industry (NAICS 561910)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345062756.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.