LINCOLN, NE —
OSHA Inspection: MWE SERVICES, INC.
Federal Agency inspection · Safety discipline
At a glance
On , OSHA opened a federal Agency safety inspection of MWE SERVICES, INC. in 6601 PIONEER BLVD, LINCOLN, NE 68506 (NAICS 238990). OSHA activity number 345084206.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MWE SERVICES, INC.
- Site address
- 6601 PIONEER BLVD
- City
- LINCOLN
- State
- NE
- ZIP
- 68506
- Mailing
- 1935 YOLANDE AVENUE, LINCOLN, NE 68521
What kind of inspection was it?
- Inspection type
- Federal Agency (M)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238990
- Employees
- 60
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.134 C01 I
- Issued
- Jun 2, 2021
- Abate by
- Jul 20, 2021
- Penalty
- Initial $5,461 · Current $5,000 Reduced
General-duty citation text
29 CFR 1910.134(c)(1)(i): In any workplace where respirators are necessary to protect the health of the employee or whenever respirators are required by the employer, the employer shall establish and implement a written respiratory protection program with worksite-specific procedures. The program shall be updated as necessary to reflect those changes in workplace conditions that affect respirator use. The employer shall include in the program the following provisions of this section, as applicable: Procedures for selecting respirators for use in the workplace: The employer is failing to develop and implement a written respiratory protection program to prevent employee exposure to respiratory hazards associated with crystalline silica and particulate. This was most recently documented on or about January 1, 2021 at 6601 Pioneers Boulevard, Lincoln, Nebraska when employees where performing structural demolition work of an elevated concrete pad with a hand held masonry saw without wear of respirators.
Recent events (2)
- — I (O) $5000
- — Z (S) $5461
1926.502 D16 V
- Issued
- Jun 2, 2021
- Abate by
- Jun 28, 2021
- Penalty
- Initial $9,557 · Current $8,000 Reduced
General-duty citation text
1926.502(d)(16)(v) have sufficient strength to withstand twice the potential impact energy of an employee free falling a distance of 6 feet (1.8 m), or the free fall distance permitted by the system, whichever is less. Note: If the personal fall arrest system meets the criteria and protocols contained in Appendix C to subpart M, and if the system is being used by an employee having a combined person and tool weight of less than 310 pounds (140 kg), the system will be considered to be in compliance with the provisions of paragraph (d)(16) of this section. If the system is used by an employee having a combined tool and body weight of 310 pounds (140 kg) or more, then the employer must appropriately modify the criteria and protocols of the Appendix to provide proper protection for such heavier weights, or the system will not be deemed to be in compliance with the requirements of paragraph (d)(16) of this section. 29 CFR 1926.502(d)(15):Anchorage points used for attachment of personal fall arrest equipment were not independent of any anchorage point being used to support or suspend platforms and capable of supporting at least 5,000 pounds (22.2 kN) per employee: The employer is failing to protect employees from fall hazards when performing demolition operations. This was most recently documented on or about January 1, 2021 at 6601 Pioneers Boulevard, Lincoln, Nebraska when employees where performing structural demolition work of an elevated concrete pad with a hand held masonry saw resulting in the death of one employee and injury of another. The employee were working at a height of 9 feet 2 inches without use of adequate anchorage point attachments to personal fall arrest equipment when the surface they were working on collapsed.
Recent events (2)
- — I (S) $8000
- — Z (S) $9557
1926.21 B02
- Issued
- Jun 2, 2021
- Abate by
- Jul 20, 2021
- Penalty
- Initial $9,557 · Current $8,000 Reduced
General-duty citation text
1926.21(b)(2) The employer shall instruct each employee in the recognition and avoidance of unsafe conditions and the regulations applicable to his work environment to control or eliminate any hazards or other exposure to illness or injury. 29 CFR 1926.850(a):Prior to permitting employees to start demolition operations, an engineering survey was not made by a competent person of the structure to determine the condition of the framing, floors, and walls, and possibility of unplanned collapse of any portion of the structure, including adjacent structures where employees may be exposed. The employer did not have in writing evidence that such a survey was performed: The employer is failing to ensure that an engineering survey was available or accomplished by a competent person prior to employees starting structural demolition operations. This was most recently documented on or about January 1, 2021 at 6601 Pioneers Boulevard, Lincoln, Nebraska when employees where performing structural demolition work of an elevated concrete pad which collapsed resulting in the death of one employee and injury of another.
Recent events (2)
- — I (S) $8000
- — Z (S) $9557
1926.1153 C01
- Issued
- Jun 2, 2021
- Abate by
- Jul 20, 2021
- Penalty
- Initial $5,461 · Current $0 Reduced
General-duty citation text
29 CFR 1926.1153(c)(1): For each employee engaged in a task identified on Table 1, the employer did not fully and properly implement the engineering controls, work practices, and respiratory protection specified for the task on Table 1, unless the employer assesses and limits the exposure of the employee to respirable crystalline silica in accordance with paragraph (d) of this section: The employer is failing to protect employees exposed to the respiratory hazard associated with crystalline silica. This was most recently documented on or about January 1, 2021 at 6601 Pioneers Boulevard, Lincoln, Nebraska when employee where performing structural demolition work of an elevated concrete pad with a hand held masonry saw without use of respirators.
Recent events (2)
- — I (S) $0
- — Z (S) $5461
More inspections at MWE Services, INC.
View MWE Services, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 238990)
More inspections in NE
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345084206.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.