OSHA Inspection: SCAFFOLD RESOURCE, LLC.

Issued

2021-03-24 00:00:00

Penalty

Initial $13653.00 · Current $0.00 Reduced

General-duty citation text

29 CFR  1926.200(b)(1):A danger sign  was not used where an immediate  hazard exists:  a)	Gallery 102 - While on the second floor, employees entered and were removing material from an Electro-Elsa material hoist, model number M20S, serial number 880711, where the loading dock door was not secure in that it was missing a door slide latch, and had a broken or missing door guide, exposing employees to a fall hazard of 28 feet and 11 inches, and a danger sign was not posted on or about 09/28/2020.  ABATEMENT DOCUMENTATION REQUIRED

Issued

2021-03-24 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR  1926.200(h)(1): Accident prevention tags shall be used as a temporary means of warning employees of an existing hazard, such as defective tools, equipment, etc. They shall not be used in place of, or as a substitute for, accident prevention signs.  a) Gallery 102 - While on the second floor, employees entered and were removing material from an Electro-Elsa material hoist, model number M20S, serial number 880711, that was not tagged as defective or out of service, where the loading dock door was not secure in that it was missing a door slide latch, and had a broken or missing door guide, exposing employees to a fall hazard of 28 feet and 11 inches, on or about 09/28/2020.  Or In the Alternative:  29 CFR  1926.20(b)(3): Machinery, tool(s), material(s), or equipment which was not in compliance with the applicable requirement(s) of 29 CFR 1926 was not prohibited, and/or was not either identified as unsafe by tagging, or locking the controls to render them inoperable, or physically removed from its place of operation.   a) Gallery 102 - While on the second floor, employees entered and were removing material from an Electro-Elsa material hoist, model number M20S, serial number 880711, that was not tagged as defective or out of service, where the loading dock door was not secure in that it was missing a door slide latch, and had a broken or missing door guide, exposing employees to a fall hazard of 28 feet and 11 inches, on or about 09/28/2020.  NO ABATEMENT DOCUMENTATION REQUIRED

Issued

2021-03-24 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR  1926.552(b)(1)(i): Operating rules were not established and posted at the operator's station of the hoist.  a) Gallery 102 - Operating rules were not posted at the operators station on an Electro-Elsa material hoist, model number M20S, serial number 88071, where drywall and insulation bundles were being hoisted to the second floor, on or about 09/28/2020.  ABATEMENT DOCUMENTATION NOT REQUIRED

Issued

2021-03-24 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR  1926.552(b)(4):The operator's station of a hoisting machine was  not provided with overhead protection equivalent to tight planking not less than 2 inches thick:  a) Gallery 102 - Subcontractor employees were using an Electro-Elsa material hoist, model number M20S, serial number 880711, to hoist drywall and insulation bundles had a  three quarter inch plywood for overhead protection, on or about 09/28/2020.  ABATEMENT DOCUMENTATION NOT REQUIRED