Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: RS CONSTRUCTION, LLC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of RS CONSTRUCTION, LLC. in 1001 BAMAR LANE, GALVESTON, TX 77551 (NAICS 236116). OSHA activity number 345109375.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch RS Construction, LLC. — free Get an email when a new federal OSHA severe-injury report for RS Construction, LLC. is published. One employer, no account, unsubscribe in one click.
Site address
1001 BAMAR LANE
City
GALVESTON
State
TX
ZIP
77551
Mailing
2757 FM 517, SAN LEON, TX 77539
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
236116
Employees
13
Ownership type
A

13 citations on file for this inspection.

1926.100 A

Serious Gravity 1 1 instance 5 exposed
Issued
Mar 18, 2021
Abate by
Mar 25, 2021
Penalty
Initial $2,340 · Current $2,340
29 CFR  1926.100(a):Employees were not protected by protective helmets while working in areas where there was a possible danger of head injury from impact, or from falling or flying objects, or from electrical shock and burns:  a) At the jobsite, employees on the ground were not wearing head protection, exposing employees to the hazard of head injuries.
Recent events (1)
  • — Z (S) $2340

1926.102 A01

Serious Gravity 1 1 instance 5 exposed
Issued
Mar 18, 2021
Abate by
Mar 25, 2021
Penalty
Initial $0 · Current $0
29 CFR  1926.102(a)(1):  Employees did not use eye and face protection equipment when machines or operations presented potential eye or face injury from physical, chemical, or radiation agents:  a) At the jobsite, employees were not wearing eye protection, exposing employees to the hazard of eye injuries.
Recent events (1)
  • — Z (S) $0

1926.451 F03

Serious Gravity 10 1 instance 3 exposed
Issued
Mar 18, 2021
Abate by
Mar 25, 2021
Penalty
Initial $5,461 · Current $5,461
29 CFR  1926.451(f)(3): Scaffolds and scaffold components were not inspected for visible defects by a competent person before each work shift, and after any occurrence which could affect a scaffold's structural integrity:  a) At the jobsite, the job made scaffolding that was erected on the edge of the residential property under construction had not been inspected by a competent person, exposing employees to a fall hazard of approximately 21 feet.
Recent events (1)
  • — Z (S) $5461

1926.451 B02

Serious Gravity 5 1 instance 2 exposed
Issued
Mar 18, 2021
Abate by
Mar 25, 2021
Penalty
Initial $0 · Current $0
29 CFR  1926.451(b)(2):  Each scaffold platform and walkway was not at least 18 inches (46 cm) wide:  a) At the jobsite, the job made scaffolding erected on the edge of the residential property under construction did not have scaffold planks that were at least 18 inches wide, exposing employees to a fall hazard of approximately 21 feet.
Recent events (1)
  • — Z (S) $0

1926.451 G01 VII

Serious Gravity 5 1 instance 3 exposed
Issued
Mar 18, 2021
Abate by
Mar 25, 2021
Penalty
Initial $0 · Current $0
29 CFR  1926.451(g)(1)(vii): Each employee on a scaffold, not otherwise specified in paragraphs (g)(1)(i) through (g)(1)(vi) of this section, more than 10 feet (3.1 m) above lower level was not protected from falls by the use of personal fall arrest systems or guardrail systems meeting the requirements of paragraph (g)(4) of this section.feet above a lower level were not protected from falling to that lower level:  a) At the jobsite, employees working from jobsite scaffolding erected on the edge of the residential property were not protected from falling, exposing employees to a hazard of falling approximately 21 feet.
Recent events (1)
  • — Z (S) $0

1926.454 A

Serious Gravity 5 1 instance 5 exposed
Issued
Mar 18, 2021
Abate by
Apr 6, 2021
Penalty
Initial $0 · Current $0
29 CFR  1926.454(a):  The employer did not have each employee who performs work while on a scaffold trained by a person qualified in the subject matter to recognize the hazards associated with the type of scaffold being used and to understand the procedures to control or minimize those hazards. The training shall include the following areas, as applicable:  a) At the jobsite, employees conducted work from the job made scaffolding erected along the edge of the property under construction had not been trained to recognize the hazards associated with scaffolding, exposing employees to a fall hazard of approximately 21 feet.
Recent events (1)
  • — Z (S) $0

1926.304 D

Serious Gravity 5 1 instance 1 exposed
Issued
Mar 18, 2021
Abate by
Mar 25, 2021
Penalty
Initial $3,121 · Current $3,121
29 CFR  1926.304(d):  Each portable, power-driven circular saw withdrawn from the work did not automatically and instantly return the lower guard to the covering position of the saw:  a) At the jobsite, the blade guard of a Makita 5007F Circular Saw was restrained, exposing employees to the hazard of cuts and amputations.
Recent events (1)
  • — Z (S) $3121

1926.501 B13

Serious Gravity 5 1 instance 2 exposed
Issued
Mar 18, 2021
Abate by
Mar 25, 2021
Penalty
Initial $3,901 · Current $3,901
29 CFR  1926.501(b)(13):  Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system:  a) At the jobsite, an employee was not wearing fall protection, exposing the employee to a fall hazard greater than 6 feet.
Recent events (1)
  • — Z (S) $3901

1926.503 A01

Serious Gravity 5 1 instance 2 exposed
Issued
Mar 18, 2021
Abate by
Apr 6, 2021
Penalty
Initial $0 · Current $0
29 CFR  1926.503(a)(1):  The employer did not train each employee who might be exposed to fall hazards to enable them to recognize fall hazards and the procedures to be followed in order to minimize these hazards:  a) At the jobsite, employees had not been trained on the procedures to be followed in order to minimize the hazards associated with falls, exposing employees to a fall hazard of approximately 30 feet.
Recent events (1)
  • — Z (S) $0

1926.1053 B01

Serious Gravity 1 1 instance 5 exposed
Issued
Mar 18, 2021
Abate by
Mar 25, 2021
Penalty
Initial $2,340 · Current $2,340
29 CFR  1926.1053(b)(1):  Where portable ladders were used for access to an upper landing surface and the ladder's length allowed, the ladder side rails did not extend at least 3 feet (.9 m) above the upper landing surface being accessed:  a) At the jobsite, the job made ladder used to access the work platform of the residential property under construction did not extend three feet above the landing, exposing employees to falling approximately 7 feet.
Recent events (1)
  • — Z (S) $2340

1926.1053 B15

Serious Gravity 1 1 instance 5 exposed
Issued
Mar 18, 2021
Abate by
Mar 25, 2021
Penalty
Initial $0 · Current $0
29 CFR  1926.1053(b)(15): Ladders were not inspected by a competent person for visible defects on a periodic basis and after any occurrence that could affect their safe use:  a) At the jobsite, the job made ladder used to gain access to the residential property was not inspected for visible defects by a competent person.
Recent events (1)
  • — Z (S) $0

1926.1053 B04

Serious Gravity 1 1 instance 5 exposed
Issued
Mar 18, 2021
Abate by
Mar 25, 2021
Penalty
Initial $0 · Current $0
29 CFR  1926.1053(b)(4):  Ladders were used for purposes other than the purpose for which they were designed:  a) At the jobsite, the Werner 8 foot A-Frame ladder was leaned against the second level of the residential property under construction and used to gain access, exposing employees to a fall hazard of approximately 12 feet.
Recent events (1)
  • — Z (S) $0

1926.1060 A

Serious Gravity 1 1 instance 5 exposed
Issued
Mar 18, 2021
Abate by
Apr 6, 2021
Penalty
Initial $0 · Current $0
29 CFR  1926.1060(a):  The employer did not provide a training program for each employee using ladders and stairways, as necessary, which would train each employee in the procedures to be followed to minimize hazards related to ladders and stairways:  a) At the jobsite, employees had not been trained on the procedures to be followed to minimize hazards related to ladders, exposing employees to fall hazards of approximately 12 feet.
Recent events (1)
  • — Z (S) $0

View RS Construction, LLC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345109375.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.