Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: ALL HUSTLE MOTORSPORTS

Complaint inspection · Health discipline

On , OSHA opened a complaint health inspection of ALL HUSTLE MOTORSPORTS in 10390 TACONIC TERRACE, CINCINNATI, OH 45215 (NAICS 811121). OSHA activity number 345122014.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch ALL Hustle Motorsports — free Get an email when a new federal OSHA severe-injury report for ALL Hustle Motorsports is published. One employer, no account, unsubscribe in one click.
Site address
10390 TACONIC TERRACE
City
CINCINNATI
State
OH
ZIP
45215
Mailing
55 TECHVIEW DRIVE, CINCINNATI, OH 45215
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
811121
Employees
5
Ownership type
A

4 citations on file for this inspection.

1910.134 E01

Serious Gravity 5 1 instance 1 exposed
Issued
May 24, 2021
Penalty
Initial $2,926 · Current $2,926
29 CFR 1910.134(e)(1): General. The employer shall provide a medical evaluation to determine the employee's ability to use a respirator, before the employee is fit tested or required to use the respirator in the workplace. The employer may discontinue an employee's medical evaluations when the employee is no longer required to use a respirator.  a.) On or about January 28, 2021, the employer did not provide a medical evaluation to employees using respirators to determine their ability to use a respirator when powder coating and spray painting automotive parts.
Recent events (1)
  • — Z (S) $2926

1910.1200 G08

Serious Gravity 5 1 instance 2 exposed
Issued
May 24, 2021
Penalty
Initial $2,926 · Current $2,926
29 CFR 1910.1200(g)(8): The employer shall maintain in the workplace copies of the required safety data sheets for each hazardous chemical, and shall ensure that they are readily accessible during each work shift to employees when they are in their work area(s). (Electronic access and other alternatives to maintaining paper copies of the safety data sheets are permitted as long as no barriers to immediate employee access in each workplace are created by such options.)  a.)  On or about January 28, 2021, the employer did not maintain copies of the required safety data sheets for the hazardous chemicals such as but not limited to Rust-Oleum spray paint, One Hit Wonder (OHW) hydrographic paint, and Omni auto paint tint that were stored and used inside their establishment.
Recent events (1)
  • — Z (S) $2926

1910.1200 H01

Serious Gravity 5 1 instance 2 exposed
Issued
May 24, 2021
Penalty
Initial $0 · Current $0
29 CFR  1910.1200(h)(1): Employers shall provide employees with effective information and training on hazardous chemicals in their work area at the time of their initial assignment, and whenever a new chemical hazard the employees have not previously been trained about is introduced into their work area. Information and training may be designed to cover categories of hazards (e.g., flammability, carcinogenicity) or specific chemicals. Chemical-specific information must always be available through labels and safety data sheets.  a.)  On or about January 28, 2021, the employer did not provide training to employees on the hazardous chemicals  used and stored in their work areas such as but not limited to Rust-Oleum spray paint, One Hit Wonder (OHW) hydrographic paint, and Omni auto paint tint.
Recent events (1)
  • — Z (S) $0

1910.134 F02

Other-than-serious 1 instance 1 exposed
Issued
May 24, 2021
Penalty
Initial $329 · Current $329
29 CFR 1910.134(f)(2): The employer shall ensure that an employee using a tight-fitting facepiece respirator is fit tested prior to initial use of the respirator, whenever a different respirator facepiece (size, style, model or make) is used, and at least annually thereafter.  On or about January 28, 2021, the employer did not conduct a fit test for its employee prior to using a respirator during spray painting and powder coating activities.
Recent events (1)
  • — Z (O) $329

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345122014.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.