COLUMBUS, MS —
OSHA Inspection: MOTUS INTEGRATED TECHNOLOGIES
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of MOTUS INTEGRATED TECHNOLOGIES in 221 FABRITEK DRIVE, COLUMBUS, MS 39702 (NAICS 336360). OSHA activity number 345134225.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MOTUS INTEGRATED TECHNOLOGIES
- Site address
- 221 FABRITEK DRIVE
- City
- COLUMBUS
- State
- MS
- ZIP
- 39702
- Mailing
- 221 FABRITEK DRIVE, COLUMBUS, MS 39702
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 336360
- Employees
- 73
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.132 D01
- Issued
- May 27, 2021
- Abate by
- Jul 30, 2021
- Penalty
- Initial $9,753 · Current $5,000 Reduced
General-duty citation text
29 CFR 1910.132(d)(1):The employer shall assess the workplace to determine if hazards are present, or are likely to be present, which necessitate the use of personal protective equipment (PPE). If such hazards are present, or likely to be present, the employer shall: (a) Facility - On or about January 27, 2021 the employer has not completed a workplace assessment to determine controls required to prevent employee exposure to hazards present at the facility, exposing employees to electrical hazards.
Recent events (2)
- — I (S) $5000
- — Z (S) $9753
1910.146 E01
- Issued
- May 27, 2021
- Abate by
- Jun 21, 2021
- Penalty
- Initial $9,753 · Current $4,500 Reduced
General-duty citation text
29 CFR 1910.146(e)(1): Before entry is authorized, the employer shall document the completion of measures required by paragraph (d)(3) of this section by preparing an entry permit: (a) Line 22 Card - On or about January 27, 2021 the employer did not complete a permit for employees entering a permit required entry space exposing employees to hazardous atmospheres. (b) Line 21 CFX - On or about January 27, 2021 the employer did not complete a permit for employees entering a permit required entry space exposing employees to hazardous atmospheres.
Recent events (2)
- — I (S) $4500
- — Z (S) $9753
1910.147 D03
- Issued
- May 27, 2021
- Abate by
- Jun 21, 2021
- Penalty
- Initial $9,753 · Current $5,000 Reduced
General-duty citation text
29 CFR 1910.147(d)(3):Machine or equipment isolation. All energy isolating devices that are needed to control the energy to the machine or equipment shall be physically located and operated in such a manner as to isolate the machine or equipment from the energy source(s). (a) Line 22 Needle Loom - On or about January 27, 2021 the employer did not ensure maintenance employees adjusting the belt tension and tracking located and operated energy isolating mechanisms prior to maintenance being performed exposing employees to caught-in hazards.
Recent events (2)
- — I (S) $5000
- — Z (S) $9753
1910.147 D04 I
- Issued
- May 27, 2021
- Abate by
- Jun 21, 2021
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(d)(4)(i): Lockout or tagout devices shall be affixed to each energy isolating device by authorized employees. (a) Line 22 Needle Loom - On or about January 27, 2021 the employer did not ensure maintenance employees adjusting the belt tension and tracking affixed a locking device to energy isolating mechanisms prior to maintenance being performed exposing employees to caught-in hazards.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.333 A
- Issued
- May 27, 2021
- Abate by
- Jun 21, 2021
- Penalty
- Initial $9,753 · Current $5,000 Reduced
General-duty citation text
29 CFR 1910.333(a): "General." Safety-related work practices shall be employed to prevent electric shock or other injuries resulting from either direct or indirect electrical contacts, when work is performed near or on equipment or circuits which are or may be energized. The specific safety-related work practices shall be consistent with the nature and extent of the associated electrical hazards. (a) Facility - On or about January 27, 2021 maintenance employees work on energized 480 volt electrical without personal protective equipment exposing them to electrical hazards.
Recent events (2)
- — I (S) $5000
- — Z (S) $9753
More inspections in this industry (NAICS 336360)
More inspections in MS
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345134225.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.