Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: FREDDY DESIGN 1 CORP.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of FREDDY DESIGN 1 CORP. in 808 GROVE STREET, GLENCOE, IL 60022 (NAICS 238130). OSHA activity number 345138036.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Freddy Design 1 Corp. — free Get an email when a new federal OSHA severe-injury report for Freddy Design 1 Corp. is published. One employer, no account, unsubscribe in one click.
Site address
808 GROVE STREET
City
GLENCOE
State
IL
ZIP
60022
Mailing
22751 IL-113, WILMINGTON, IL 60481
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238130
Employees
4
Ownership type
A

3 citations on file for this inspection.

1926.102 A01

Serious Gravity 5 1 instance 2 exposed
Issued
Feb 18, 2021
Abate by
Mar 16, 2021
Penalty
Initial $2,341 · Current $1,561 Reduced
29 CFR  1926.102(a)(1):The employer shall ensure that each affected employee uses appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation.  a) On or about February 8, 2021, all employees using pneumatic nail guns did not utilize eye protection.  In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
  • — I (S) $1560.5
  • — Z (S) $2341

1926.501 B13

Serious Gravity 10 1 instance 2 exposed
Issued
Feb 18, 2021
Abate by
Mar 16, 2021
Penalty
Initial $4,096 · Current $1,561 Reduced
29 CFR  1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b):   a) On February 8, 2021, employees were exposed to fall hazards while installing sheeting on the roof of a two story residential home.  In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
  • — I (S) $1560.5
  • — Z (S) $4096

1926.503 A01

Serious Gravity 5 1 instance 2 exposed
Issued
Feb 18, 2021
Abate by
Mar 16, 2021
Penalty
Initial $2,926 · Current $1,561 Reduced
29 CFR  1926.503(a)(1):The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards:  a) On or about February 8, 2020, the employer failed to train all employees that were exposed to fall hazards.  Employees were sheeting a two story high roof without being trained on the recognition of hazards and the use of fall protection systems.  In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
  • — I (S) $1560.5
  • — Z (S) $2926

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345138036.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.