SYOSSET, NY —
OSHA Inspection: B&S AIRCRAFT ALLOYS
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of B&S AIRCRAFT ALLOYS in 10 AERIAL WAY, SYOSSET, NY 11791 (NAICS 336413). OSHA activity number 345139091.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- B&S AIRCRAFT ALLOYS
- Site address
- 10 AERIAL WAY
- City
- SYOSSET
- State
- NY
- ZIP
- 11791
- Mailing
- 10 AERIAL WAY, SYOSSET, NY 11791
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 336413
- Employees
- 16
- Ownership type
- A
Citations
3 citations on file for this inspection.
1910.213 C01
- Issued
- Aug 2, 2021
- Penalty
- Initial $3,901 · Current $4,000
General-duty citation text
29 CFR 1910.213(c)(1): Each circular hand-fed ripsaw were not guarded by a hood which shall completely enclose that portion of the saw above the table and that portion of the saw above the material being cut: a) Workplace, shop area- Employees were cutting wood on a Baileigh Table Saw that did not have a hood guard; on or about 2/4/21. Note: Because abatement of this violation is already documented in the case file, the employer need not submit certification or documentation of abatement for this violation as normally required by CFR 1903.19.
Recent events (3)
- — R (S) $4000
- — C (S) $3901
- — Z (S) $3901
1910.213 C02
- Issued
- Aug 2, 2021
- Abate by
- Aug 26, 2021
- Penalty
- Initial $3,901 · Current $0 Reduced
General-duty citation text
29 CFR 1910.213(c)(2): Hand-fed circular ripsaw(s) were not furnished with a spreader to prevent material from squeezing the saw or being thrown back on the operator: a) Workplace, shop area- Employees were cutting wood on a Baileigh Table Saw that did not have a spreader to prevent material from squeezing the saw or being thrown back on the operator; on or about 2/4/21. Note: Because abatement of this violation is already documented in the case file, the employer need not submit certification or documentation of abatement for this violation as normally required by CFR 1903.19.
Recent events (3)
- — R (S) $0
- — C (S) $3901
- — Z (S) $3901
1910.213 C03
- Issued
- Aug 2, 2021
- Abate by
- Aug 26, 2021
- Penalty
- Initial $3,901 · Current $0 Reduced
General-duty citation text
29 CFR 1910.213(c)(3): Hand-fed ripsaw(s) did not have non kickback fingers or dogs designed to provide adequate holding power for all thicknesses of materials being cut: a) Workplace, shop area- Employees were cutting wood on a Baileigh Table Saw that did not have non kickback finger to to secure materials being cut; on or about 2/4/21. Note: Because abatement of this violation is already documented in the case file, the employer need not submit certification or documentation of abatement for this violation as normally required by CFR 1903.19.
Recent events (3)
- — R (S) $0
- — C (S) $3901
- — Z (S) $3901
More inspections in this industry (NAICS 336413)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345139091.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.