Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: H. S. ENTERPRISES LLC

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of H. S. ENTERPRISES LLC in 1401 W. JUNGE BOULEVARD, JOPLIN, MO 64804 (NAICS 311919). OSHA activity number 345160824.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch H. S. Enterprises LLC — free Get an email when a new federal OSHA severe-injury report for H. S. Enterprises LLC is published. One employer, no account, unsubscribe in one click.
Site address
1401 W. JUNGE BOULEVARD
City
JOPLIN
State
MO
ZIP
64804
Mailing
1401 W. JUNGE BOULEVARD, JOPLIN, MO 64804
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
311919
Employees
60
Ownership type
A

5 citations on file for this inspection.

1910.147 C06 II

Serious Gravity 5 1 instance 2 exposed
Issued
Jul 22, 2021
Abate by
Sep 17, 2021
Penalty
Initial $5,461 · Current $3,004 Reduced
29 CFR  1910.147(c)(6)(ii): The employer did not certify that periodic inspections of the energy control procedures had been performed:   At a worksite located at 1401 W. Junge Boulevard, Joplin, MO  employees were exposed to electrical hazards.  There was no certification that an annual inspection of the lockout tagout program had been conducted.
Recent events (2)
  • — I (S) $3003.55
  • — Z (S) $5461

1910.178 L04 III

Serious Gravity 5 1 instance 2 exposed
Issued
Jul 22, 2021
Penalty
Initial $5,461 · Current $3,004 Reduced
29 CFR  1910.178(l)(4)(iii): An evaluation of each powered industrial truck operator's performance was not being conducted at least once every three years:   At a worksite located at 1401 W. Junge Boulevard, Joplin, MO  employees were exposed to struck by hazards in the warehouse and production.  Forklift and powered pallet jack operators were not trained and evaluated at least once every three years.
Recent events (2)
  • — I (S) $3003.55
  • — Z (S) $5461

1910.178 L06

Deleted Serious Gravity 5 1 instance 2 exposed
Issued
Jul 22, 2021
Penalty
Initial $0 · Current $0
29 CFR  1910.178(l)(6): The employer did not certify that each operator has been trained and evaluated as required by this paragraph (l):   At a worksite located at 1401 W. Junge Boulevard, Joplin, MO  employees were exposed to struck by hazards.  There were no forklift certification records for forklift operators available prior to February 23, 2021.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.219 D01

Serious Gravity 5 1 instance 3 exposed
Issued
Jul 22, 2021
Abate by
Aug 17, 2021
Penalty
Initial $5,461 · Current $3,004 Reduced
29 CFR  1910.219(d)(1):Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o):  At a worksite located at 1401 W. Junge Boulevard, Joplin, MO  employees were exposed to amputation hazards in the bin room.  The pulleys were not fully guarded for the Duroflow Blower that powers the # 1, # 2 and # 3 bins. The belts and pulleys create ingoing nippoints.
Recent events (2)
  • — I (S) $3003.55
  • — Z (S) $5461

1910.219 E03 I

Serious Gravity 5 1 instance 3 exposed
Issued
Jul 22, 2021
Abate by
Aug 17, 2021
Penalty
Initial $0 · Current $0
29 CFR  1910.219(e)(3)(i): Vertical or inclined belt(s) were not enclosed by guard(s) conforming to the requirements specified at 29 CFR 1910.219(m) and (o) of this section:  At a worksite located at 1401 W. Junge Boulevard, Joplin, MO  employees were exposed to amputation hazards. The inclined belts were not fully guarded for the Duroflow Blower that powers the #1, #2, and #3 bins.  The belts and pulleys created an ingoing nippoint.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

View H. S. Enterprises LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345160824.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.